• Mustang Forums
  • 2015 - 2023 (S550) Mustang -General/Talk

Help Me Fix My Steep Driveway/curb So I Can Get An S550

  • Thread starter Thread starter shahram72
  • Start date Start date Sep 12, 2015
Prev
  • 1
  • 2
First Prev 2 of 2
S

shahram72

Member
Sep 6, 2015
67
5
8
Sep 15, 2015
#21
  • Sep 15, 2015
  • #21
You raise some valid points. But the reality is different depending on where you live. I drive a UPS truck for a living, so I think it's safe to say I see A LOT of driveways. And here, there are so many people who do this that nobody cares. I saw many really old ones just today that are solid and stable. I have a background in construction and while I have not laid very much concrete, I could make it look reasonably smooth with a trowel. Now I would not do this in a new neighborhood, that's different. It would look terrible next to all the new materials. But this is an almost 20 year old neighborhood and my curb is already chewed up from 2 repavings. Bridjit will cost $500. I think that's excessive. I'd be happy to pay $300 for it if it spanned my entire driveway, but it won't. With an extra section, and shipping. It's $500. And someone could steal it.
 
S

shahram72

Member
Sep 6, 2015
67
5
8
Sep 17, 2015
#22
  • Sep 17, 2015
  • #22
OK, no Mustang stuff here today but we pimped my wife's ride, a '15 Honda CR-V LX that came with steel wheels. These look much nicer. This is the "practical" car in my garage that makes owning a Mustang even a slight possibility.
 

Attachments

  • crv with new wheels.webp
    70.1 KB · Views: 366

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor
Admin Dude
Jan 4, 1985
43,181
21,349
234
Box behind Walmart
Sep 18, 2015
#23
  • Sep 18, 2015
  • #23
Naw... The reality is pretty much the same no matter where you pour concrete.


I give it less than a week before the first crack. Not even 6 months before it's crumbling apart and broken pieces start moving around to form small communities. The portion that you're driving over will need to be one, solid, poured piece if it's expected to last.

If you live somewhere where water freezes outdoors well.....
 
Reactions: 84Ttop
S

shahram72

Member
Sep 6, 2015
67
5
8
Sep 18, 2015
#24
  • Sep 18, 2015
  • #24
I have a background in construction, so I know you're right, but I can take photos of TONS of old installations just like this that are rock solid. Some chipping and cracking is to be expected, all concrete will crack.
 
S

shahram72

Member
Sep 6, 2015
67
5
8
Sep 19, 2015
#25
  • Sep 19, 2015
  • #25
I went and drove one for the first time today. Damn... I was impressed. Very refined. This is not the same Mustang I drove years ago, not even close. Very comfortable. Very smooth. No vibration at idle like the 4cyl cars I have been testing. The V6 made enough power, it's faster than the RL for sure. It almost felt underpowered, but then I looked at the speedo and how it was climbing. You just don't notice it. It's that smooth and refined. If it was more dramatic, then the 435 hp in the GT would be dangerous. And it was almost if not as quiet as my RL inside. I'm sure my RL is quieter, but not by much. I accelerated hard a couple times, plenty of power and controllable, and I drove it smooth and gentle like I do my RL most of the time, and it had a similar ride quality. Firm, but comfortable. This was the V6, mind you. I can get the same relaxing feel after a hard day at work in this car, and the motor and tranny is smooth and quiet. Ford really did a good job engineering this car for guys like me, who want the best compromise possible. It felt like an expensive car whereas the other sedans with 4 cyl just did not. I used to have a sports car, and would like one again, but don't want to give up comfort, and I don't have to with this. The car makes me feel like this new Mazda commercial, which I love. Watch it, it's one of those commercials you watch and really enjoy. Very well done.

View: https://youtu.be/t5UjmHOl4pU
 
S

shahram72

Member
Sep 6, 2015
67
5
8
Sep 20, 2015
#26
  • Sep 20, 2015
  • #26
Did half the driveway today. If the city makes me remove it I will make them remove and report every single of the thousands of modded curbs like this throughout the city. I just don't think it will happen. Looks OK, will look better when it's dry, I went to Lowe's this morning and was lucky that they had quickcrete with poly fibers in it to help it hold together.
 

Attachments

  • 20150920_122715.webp
    148.8 KB · Views: 359
  • 20150920_122723.webp
    126 KB · Views: 376

Still Bill

Active Member
Oct 25, 2014
92
17
28
Washington State.
Sep 21, 2015
#27
  • Sep 21, 2015
  • #27
shahram72 said:
Did half the driveway today. If the city makes me remove it I will make them remove and report every single of the thousands of modded curbs like this throughout the city. I just don't think it will happen. Looks OK, will look better when it's dry, I went to Lowe's this morning and was lucky that they had quickcrete with poly fibers in it to help it hold together.
Click to expand...
Did you drive it up your driveway to see if it cleared?
 
S

shahram72

Member
Sep 6, 2015
67
5
8
Sep 21, 2015
#28
  • Sep 21, 2015
  • #28
No, I didn't see the point. I was going to do this anyway. I watched my wife back the Acura down the other day and it came within about a half inch of hitting as the tire drops into the curb. That's too close. I was going to do this anyway. My next door neighbor thinks it great, might do it herself. Things are different around here. It's an old neighborhood. If it were a new neighborhood with $250K houses, brijjit would be the only solution. Getting a Mustang is going to be a process. Looking to get it later this year when some type of additional incentive comes back. And I want a 2016. I don't want it being a year old 2 months after I buy it. Unless they are going to give me at least $4000 off it.
 
S

shahram72

Member
Sep 6, 2015
67
5
8
Feb 19, 2016
#29
  • Feb 19, 2016
  • #29
I finally got one! And the flexible rubber skirt rubs a bit even with the driveway mod but the hard plastic splitter clears just fine.
 

Attachments

  • mustang in driveway day1.webp
    86.4 KB · Views: 829

usaf_branham

15 Year Member
Oct 30, 2008
927
134
84
Boston
Feb 20, 2016
#30
  • Feb 20, 2016
  • #30
I hope it doesn't snow where you live. I could foresee a snow plow nailing that driveway mod and completely taking it out. Lol. Congrats on the new ride.


Sent from my iPhone using Tapatalk
 
S

shahram72

Member
Sep 6, 2015
67
5
8
Feb 24, 2016
#31
  • Feb 24, 2016
  • #31
It snows very occaisionally but snow plows only clear main roads and NEVER come into neighborhoods. We have very little snow equipment here. They only salt the interstates if it snows and that's rare. It's really not a snow area. When we get snow the city shuts down and we stay home.
 

MoshpitMad

Active Member
Oct 26, 2011
130
5
28
Albany, NY
Feb 25, 2016
#32
  • Feb 25, 2016
  • #32
Are you approaching, and backing out at a 45* angle? That should be all it takes to clear that. If 45* isn't enough, try getting closer to 90.
 

madspeed

Colonel Mustard
Founding Member
Nov 29, 1999
8,914
1,332
204
a van down by the river
Feb 25, 2016
#33
  • Feb 25, 2016
  • #33
Every time see this title, I think of S550
 
S

shahram72

Member
Sep 6, 2015
67
5
8
Feb 29, 2016
#34
  • Feb 29, 2016
  • #34
It's not a problem. 45 degree is fine. The rubber part rubs, but never the hard plastic splitter, so I'm good.
 

QuickSteed

Member
Apr 18, 2016
8
1
13
Apr 18, 2016
#35
  • Apr 18, 2016
  • #35
From the pictures as long as you come in from an angle youll be fine. Mine is steeper I angle but I'm also on air haha
 
Prev
  • 1
  • 2
First Prev 2 of 2
You must log in or register to reply here.

Similar threads

B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
225
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
J
Car Diagnosis
  • j.2016
  • Aug 31, 2025
  • 2015 - 2023 (S550) Mustang -General/Talk
Replies
3
Views
339
2015 - 2023 (S550) Mustang -General/Talk Aug 31, 2025
Noobz347
Progress Thread The Mach Returns - Update/build thread
  • squeak93
  • Feb 20, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
8
Views
403
1996 - 2004 SN95 Mustang -General/Talk- Aug 3, 2026
squeak93
A
Looking for Help to Fix My Dad’s 96 Mustang GT Convertible in Central Florida
  • Auspicious Angmo
  • Oct 28, 2024
  • The Welcome Wagon
Replies
1
Views
174
The Welcome Wagon Oct 28, 2024
89ripper
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
3K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 2015 - 2023 (S550) Mustang -General/Talk
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?