Help me put togehter a cheap wheel and tire combo for the track...

The Green GT · Apr 16, 2007

Ok, so far Ive got these for the tires.

275/50R15 in Nitto 555R's

And these wheels. But im not even sure what the lug pattern is on our cars and what the back spacing needs to be. Would this work?
http://store.summitracing.com/partdetail.asp?autofilter=1&part=CRR-3975112&N=700+115&autoview=sku

So what do you think?

sage2k · Apr 16, 2007

I dunno but try and get em before april 29th, i wanna try em once

The Green GT · Apr 16, 2007

I wont be getting them that soon.

You should let me try your nittos out.

sage2k · Apr 16, 2007

thats cool just bring a jack and tire iron

The Green GT · Apr 16, 2007

You got yourself a deal.

This time I wont be doing as much weight reduction. Just the jack and ****. Ill leave the seat in. And ill just get my buddy to bring my jack and stuff in his truck.

drewzx3 · Apr 16, 2007

i'm looking for a cheap set of 15's for my drag radials to.

reddy351 · Apr 16, 2007

Check the weight on those wheels. I think they're pretty heavy. I'm not sure about the offset/backspacing on a 10" wheel.

SQUEEZE&STROKE · Apr 16, 2007

I know I am not supposed to sell in the forums but I have a set of rear prostars
(15X8) I am not doing anything with. PM me for details

stprorolla49 · Apr 16, 2007

yea, i would look for a set of lightweight drag wheels in this situation...check ebay and corral for some good deals

Joe 5.0 · Apr 17, 2007

I say try to find some 16" waffles that someone is trying to give away, or any 16" V^ pair of wheels. Then get some 255/50/16 BFG drag radials for them. If its gonna be track only for sure go with something stickier than the Nitto's.

With a bolt-on 94 GT and 16" bfg dr's I cut 1.8 60's and ran 13.8's @ 98mph.

legalize420 · Apr 17, 2007

The Green GT said:
Ok, so far Ive got these for the tires.

275/50R15 in Nitto 555R's

And these wheels. But im not even sure what the lug pattern is on our cars and what the back spacing needs to be. Would this work?
http://store.summitracing.com/partdetail.asp?autofilter=1&part=CRR-3975112&N=700+115&autoview=sku

So what do you think?

5x4.5 lug pattern. you need 6.5" backspacing on a 10" wheel. i run a 255/50/16 mickey drag radial on an extra set of stock whaffle wheels. i cut consistent low 1.8 60's and i think i could get to the 1.7's. i still have stock suspension with the exception of drag shocks. i just picked up drag springs and will be getting control arms soon and going to be looking for 1.5's. as mentioned above if they are a dedicated track set of wheels get a better tire.

The Green GT · Apr 17, 2007

I have two of my old waffles (the other two floated away when it flooded ), but i culdnt find the size I wanted in Nittos for my 16's. What other tires would you guys reccomend?

legalize420 · Apr 17, 2007

255/50/16 mickey thompson et street radial(drag radial) or 26x10.5x16 et streets

badstang123 · Apr 18, 2007

legalize420 said:
255/50/16 mickey thompson et street radial(drag radial) or 26x10.5x16 et streets

I'm not questioning your judgment because I'm not that knowledgeable on the topic, but I am curious. If this set will be for the track only why wouldn't you just put a set of Mickey Thompson ET Drags on there?

legalize420 · Apr 18, 2007

badstang123 said:
I'm not questioning your judgment because I'm not that knowledgeable on the topic, but I am curious. If this set will be for the track only why wouldn't you just put a set of Mickey Thompson ET Drags on there?

good point. i switch my tires before i go so i was just thinking of a DOT tire. if you are going to be switching at the track then you could go with a slick.

The Green GT · Apr 18, 2007

Well I kinda dont want to go with something like that. As much as I would love to, I really dont want to start breaking **** from hard launches on slicks on my daily driver.

stprorolla49 · Apr 18, 2007

I'd go with either a 255 or a 275 MT ET street on waffles, or a 275 on a 15x8 used Weld wheel, either Draglite or Prostar. Its up to you man, MOB over in th.0 section got a used set of 15x8 Pacer Draglites (Weld copies) with MT ET streets on them for $150 used. Just look around, good deals can be had.

The Green GT · Apr 18, 2007

I think Im gonna go with a set of M/T ET Streets on my old waffles. It seems like the best option as of now.

sage2k · Apr 18, 2007

well at least you know how to put together a rear end just in case

The Green GT · Apr 18, 2007

sage2k said:
well at least you know how to put together a rear end just in case

lol, yea, thats a good thing. I wouldnt mind rebuilding the trac lok again, or replacing axles, but changing gears.... f that. lol
That was easily one of the messiest and grossest things Ive ever done to my Mustang.

Do you know how bad friction modifier smells? Someone told me it was bad, so of course, I opened it and took a big whiff, then i almost puked. lol

Help me put togehter a cheap wheel and tire combo for the track...

The Green GT

No 13 year olds are safe around me.

sage2k

Member

The Green GT

No 13 year olds are safe around me.

sage2k

Member

The Green GT

No 13 year olds are safe around me.

drewzx3

Active Member

reddy351

SQUEEZE&STROKE

New Member

stprorolla49

Active Member

Joe 5.0

legalize420

Active Member

The Green GT

No 13 year olds are safe around me.

legalize420

Active Member

badstang123

New Member

legalize420

Active Member

The Green GT

No 13 year olds are safe around me.

stprorolla49

Active Member

The Green GT

No 13 year olds are safe around me.

sage2k

Member

The Green GT

No 13 year olds are safe around me.

Similar threads

Help me put togehter a cheap wheel and tire combo for the track...

No 13 year olds are safe around me.

Member

No 13 year olds are safe around me.

Member

No 13 year olds are safe around me.

Active Member

New Member

Active Member

Active Member

No 13 year olds are safe around me.

Active Member

New Member

Active Member

No 13 year olds are safe around me.

Active Member

No 13 year olds are safe around me.

Member

No 13 year olds are safe around me.

Similar threads

Privacy & Transparency

Privacy & Transparency