• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Help!! MSD Distributor

  • Thread starter Thread starter 92GTpony
  • Start date Start date Nov 30, 2005
9

92GTpony

New Member
Apr 2, 2005
18
0
2
Nov 30, 2005
#1
  • Nov 30, 2005
  • #1
I'm looking at summit rightnow and I'm looking to upgrade my distributor. One MSD distributor is Electric($281) and the other is mechanical($260). Im thinking that electric is for standard 5.0 and mechanical is for carb. Thanks...

My set-up....Stock 92 5.0, pullies, 3.73 gears, 65mm TB..
 

larrendeuce

Member
Sep 13, 2003
649
1
19
Southern NJ
Nov 30, 2005
#2
  • Nov 30, 2005
  • #2
Not sure what exact models you are looking at but for the distributor to work with your stock computer and TFI ignition you need a distributor that works with TFI, they will be listed as such.

The electronic ones usually need an ignition box to work, the mechanical ones are pretty much drop in, with nothing else required.
 
M

Mike92GT

Founding Member
Jan 23, 2002
583
0
0
Florida
Dec 1, 2005
#3
  • Dec 1, 2005
  • #3
You would need part# MSD-8456, $281.88, Fits 86-93 5.0L w/ TFI
 

Busted07

I need my gorilla to be about an inch longer.
Nov 15, 2005
0
3
0
Dec 1, 2005
#4
  • Dec 1, 2005
  • #4
if everything else is stock, why are you getting a new dizzy? just curious. the stock dizzy will work above any rpm your current engine will run. i would get a 6AL before i bought a dizzy, but i dont know your future plans.
 
9

92GTpony

New Member
Apr 2, 2005
18
0
2
Dec 1, 2005
#5
  • Dec 1, 2005
  • #5
My car has over 181k miles and the distributor is still stock. Just thought It would be a good time to change out to a good one. Eventually, I will be building a new engine when my current one dies. I have around $400 in cash to spend and I was going to get new MSD distributor, MSD wires and MSD TFI Blaster coil. Any thoughts?

Everything is stock except for 3.73 gears, pullies, 65mm TB, Cold air intake, and short shifter.
 

Busted07

I need my gorilla to be about an inch longer.
Nov 15, 2005
0
3
0
Dec 1, 2005
#6
  • Dec 1, 2005
  • #6
personally, i believe that the stock dizzy will last you a while. even a stock replacement one, the reason im saying this is that you could get a lot more out of the car for now if you bought an exhaust. if you arent having misfire issues or anything like that, i wouldnt worry about the dizzy.. just replace the cap and rotor with some good replacement parts (brass inserts) and maybe get a new stock coil.
your motor as it is (in my opinion) isnt going to require more than what the stock stuff can handle. i believe the stock dizzy can be reliable up to 6,000 rpms. someone correct me if im wrong. i guess if it was me, i would just do something you would notice a difference with.
if youre pulling your motor out eventually, i would wait and spend the money on the dizzy then, and do something now that you would notice a difference in, and a full exhaust would definately wake everything up a little, and you can transfer it to the new motor as well.
but like i siad, thats just what i would do. My buddy and i just swapped the motor from his 86 into his 90, and he bought an MSD dizzy as well, and its a very nice piece. but up untill now, he had the stock coil, a 6AL, and accell wires, and with his setup, went 12.7's.

all he had was an eddy intake, the original tfs heads, a crane cobra cam and street tires
 
You must log in or register to reply here.

Similar threads

S
Preparation for Holley Terminator X install – Foxbody 306 (electrical fan, alternator, MSD Ignition, etc)
  • So_Flo
  • Mar 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
22
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 4, 2026
General karthief
1
Crank no start on a turbo and cammed pushrod 5.0
  • 1630stri
  • Sep 2, 2026
  • Digital Self-tuning Forum
Replies
2
Views
209
Digital Self-tuning Forum Sep 16, 2026
Qtrhrse23
Weber Carburetor tuning help
  • SchwarzStock
  • Jul 6, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
242
1965 - 1973 Classic Mustangs -General/Talk- Jul 19, 2026
SchwarzStock
P
Engine Carb'd 88 GT, need centrifugal advance, will an '85 Distributor Work?
  • pindude80
  • May 12, 2024
  • Fox 5.0 Mustang Tech
Replies
11
Views
2K
Fox 5.0 Mustang Tech May 13, 2024
limp
8
Engine Rough idle and aggressive sputtering when accelerating
  • 88vertible
  • Aug 13, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
1K
Fox 5.0 Mustang Tech Dec 13, 2025
Jarhead67
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?