• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

HELP! My car weighs 3620 lbs. Put it on a diet!!!

  • Thread starter Thread starter astronut1885
  • Start date Start date Feb 6, 2004
  • 1
  • 2
  • 3
  • 4
Next
1 of 4 Next Last

astronut1885

Founding Member
Jan 31, 2002
1,899
4
39
Assonet, MA
Feb 6, 2004
#1
  • Feb 6, 2004
  • #1
Hey guys. I was at my mechanics junk yard today, and we put the car on the scale for the first time. It weighed in at 3620 lbs . The scale is accurate to the pound, so this means my car is overweight . I am going to remove the six layers of rear insulation in the hatch, and the hood liner is already out, but I need more ways to kill weight. The only added weight above stock is the subframes and strut tower brace (all other mods are in sig, but they were swap outs). I want to keep my AC, spare tire and smog pump (even though it's bypassed, I still need it every other year). If there are any other areas I can shed some pounds, let me know. This things gotta get lighter.

Oh yeah- The reason I was there is because one of my U joints let go on the stock driveshaft. I am going to be adding an aluminum DS as soon as I can get one. For now I just have to listen to the old one rattle.
 

Maryland Stang

Active Member
Aug 21, 2002
1,656
30
39
Greenville, NC
Feb 6, 2004
#2
  • Feb 6, 2004
  • #2
Convert it from a GT to an LX, that's around 50 pounds. Replace the front carpet, the factory carpet weighs a good bit more than aftermarket. Do a rear seat delete. Get lightweight front seats. Flaming River manual rack, coil overs, light weight K member. Aluminum block, cylinder heads and driveshaft. Loose the quad shocks and dogbone. Remove the rear spoiler and body side moldings. Fiberglass hood and rear hatch. Loose the hatch cylinders. Manual windows and door locks. Aluminum radiator etc...
 

astronut1885

Founding Member
Jan 31, 2002
1,899
4
39
Assonet, MA
Feb 6, 2004
#3
  • Feb 6, 2004
  • #3
Woah. I'm not going that light weight. I am talking minor tricks like taking out the hatch padding and such. I just want to scrap a few pounds off the car. It's a daily driver, and I can't afford a new block or suspension mods. I already just replaced the springs with progressive rate springs.
 

Michael Yount

Mustang Master
Apr 10, 2002
9,039
6
79
Charlotte, NC
Feb 6, 2004
#4
  • Feb 6, 2004
  • #4
Were you in the car, and do you weigh about 400 lbs.?

I'd try another scale before I went crazy. I know weights can vary with options, but a Fox body even with all the options shouldn't weigh that much - it's not a vert is it?
 

astronut1885

Founding Member
Jan 31, 2002
1,899
4
39
Assonet, MA
Feb 6, 2004
#5
  • Feb 6, 2004
  • #5
Nope, the car weighed 3620 alone. It's a hatchback GT, but it has alot of sound deadening material in it, along with every option and stock component including smog and AC. The scale is a State regulated and calibrated unit, so it's accurate. We did it three times.
 

Michael Yount

Mustang Master
Apr 10, 2002
9,039
6
79
Charlotte, NC
Feb 6, 2004
#6
  • Feb 6, 2004
  • #6
All the postings I've seen with Fox body weights, about 3350 lbs. is the heaviest I've ever seen, except for some that were loaded down with 2 or 300 lbs. of stereo equipment.
 

T_5.0_N'works

New Member
Sep 30, 2003
260
0
0
Texas
Feb 6, 2004
#7
  • Feb 6, 2004
  • #7
Ok, the scale might be offset. Try another one JUST to be sure that it's working right. I do not think it weighs in excess of 3600lbs WITHOUT YOU.
 

QUICK91LX

Founding Member
Dec 7, 2001
968
3
39
New Jersey
Feb 6, 2004
#8
  • Feb 6, 2004
  • #8
whoaaa that doesnt make much sence to me...my 91 LX weighed 3200 all by itself when i weighed it...i would try another scale though...just to verify
 

astronut1885

Founding Member
Jan 31, 2002
1,899
4
39
Assonet, MA
Feb 6, 2004
#9
  • Feb 6, 2004
  • #9
well, it has the spare tire, my school books (maybe worth 90-100 lbs) in it, but not much else. At some point, a previous owner put a lot (6-7 layers) of sound deadening mats in the hatch, so I imagine there may be more elsewhere. Also, the entire chassis and undercarriage has been rust proofed with some kind of rubberized coating, don't know how much that weighs.
 

Michael Yount

Mustang Master
Apr 10, 2002
9,039
6
79
Charlotte, NC
Feb 6, 2004
#10
  • Feb 6, 2004
  • #10
I'm gonna guess the extra material weighs about - 200-300 lbs --- IF the scale is accurate. Weigh it again before you start taking stuff out.
 

astronut1885

Founding Member
Jan 31, 2002
1,899
4
39
Assonet, MA
Feb 6, 2004
#11
  • Feb 6, 2004
  • #11
I just called my mechanic, he said the scale was zeroed, so that is what my car weighed at the time. Like I said, it is a state regulated scale for calculating payments for scrap, and it's a top notch unit. I am gonna do some serious cleaning out over the next few days, once the weather improves, and then reweigh it. Believe me, we were both disgusted by the numbers.
 

NoSloCoupes

"I would do anything for a FREE muffler"
Founding Member
Mar 4, 2000
2,705
2
58
Clinton,IL
Feb 6, 2004
#12
  • Feb 6, 2004
  • #12
I have a hard time believing its over 3600lbs too. By the way, might be a bad sign seeing as your mechanic has his own junkyard,lol.
 
S

sixtyfive

Member
Jan 9, 2004
157
0
16
Feb 6, 2004
#13
  • Feb 6, 2004
  • #13
any bodies in the back?
 

astronut1885

Founding Member
Jan 31, 2002
1,899
4
39
Assonet, MA
Feb 6, 2004
#14
  • Feb 6, 2004
  • #14
Actually, he's the manager of one of the biggest salvage yards in my area. He's been racing Mustangs for twenty years, and he's the reason I'm into them. He's a family friend, and I have no reason to doubt him. He's built all three of my stangs with me.
 

Michael Yount

Mustang Master
Apr 10, 2002
9,039
6
79
Charlotte, NC
Feb 6, 2004
#15
  • Feb 6, 2004
  • #15
I don't doubt him; but I'd still have it weighed on another scale. The bigger scales are great at weights when 30-80000 lb trucks roll in and out with scrap. The smaller the weight, the more prone they are to being inaccurate. Also, gas weighs 7-8 lbs/gallon, so note your tank level so you can make adjustments as you keep weighing. 70-100 lb difference depending on how much fuel is in the tank.
 

NoSloCoupes

"I would do anything for a FREE muffler"
Founding Member
Mar 4, 2000
2,705
2
58
Clinton,IL
Feb 6, 2004
#16
  • Feb 6, 2004
  • #16
I wasn't knocking him...just thought it was funny.
 

Black331Stang

Active Member
Apr 29, 2003
1,485
0
36
Long Island, NY
Feb 6, 2004
#17
  • Feb 6, 2004
  • #17
yeah definitely get it wieghed somwhere else to double check it. Mr Yount knows his $hit and i will varify he is right about the scale with very high wieghts. that scale probably hasnt seen 3000 pounds since it was new....i had a car on a scale at Airborne Express. (shipping company) scale was good for 5000 punds, but rarely seenover 2-300. car went on (barely) and was wayyy of. also a state calibrated and accurate scale to get costs of big shipping items. i hopped on, wieghed me perfect. were just saying at least double check
 
X

xherdlr

New Member
May 19, 2003
159
0
0
Hendersonville,Nc
Feb 6, 2004
#18
  • Feb 6, 2004
  • #18
Get a second opinion, my 89 vert weighed #3620 with me in the car and I weigh 220.

Kelly
 
S

Sicarius428

Active Member
Jan 6, 2004
2,085
5
49
Feb 6, 2004
#19
  • Feb 6, 2004
  • #19
Get a fiberglass hood. That should save you some weight and balance the car out a bit better. Check under the rug and take any sound deadening under there. While you are at it take out your stereo because that will be useless then too. Other than that there is not too much to do. You can get a fiberglass rear hatch but mustangs have enough tracion problems in the rear. I am not sure why your car is so heavy. Sound deadener in the doors maybe?
Kevin
 
T

thinker

Founding Member
Jun 26, 2002
182
0
0
Corona, Ca
Feb 6, 2004
#20
  • Feb 6, 2004
  • #20
that hard rubber crap that is under your car i think was put on if you lived in area where there was snow alot or by the beach. My hatch came from hawaii and i have that crap all undernearth my car, i think it was put on so the salt in water/sand didnt rust anything up...its really annoying though. When I put my subframes on, I had to grind away some of that stuff in order to get the weld on. that stuff probably weighs a good 40-50lbs. It's all over my tank too, some of it was splattered on my driveshaft. =\
 
  • 1
  • 2
  • 3
  • 4
Next
1 of 4 Next Last
You must log in or register to reply here.

Similar threads

Who the hell puts the wrong spark plugs in a 3.8L?
  • snowstang
  • Mar 25, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
12
Views
445
1996 - 2004 SN95 Mustang -General/Talk- Apr 3, 2026
LILCBRA
Lost my Foxbody
  • Mhalc1
  • Feb 10, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
19
Views
758
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 17, 2026
Mhalc1
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
204
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
What's your tow rig?
  • LILCBRA
  • May 31, 2026
  • Other Auto Tech
Replies
3
Views
141
Other Auto Tech May 31, 2026
LILCBRA
P
Progress Thread Weight loss 90s coupe . -500lbs
  • ponixpress
  • Mar 14, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3
Replies
42
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 13, 2025
ponixpress
P
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?