HELP PICKING A SET OF HEADS

svtboy91 · Dec 11, 2009

I HAVE AN 89 HATCHBACK, PRETTY MUCH STOCK, JUST BBK AIR FILTER AND FLOWMASTERS, AND THE 3.73S ARE ON THEIR WAY. I WANT TO PUT A E303 CAM IN IT. CAN U HELP ME CHOOSE A SET OF HEADS THAT ARE GOOD. I LIVE IN CALIFORNIA SO THEY HAVE TO BE SMOG LEGAL THANKS.
ALSO WAT UPPER AND LOWER INTAKE SHOULD I GET WITH THE HEADS U CHOOSE. WHAT EVER HEADS U THINK ARE GOOD (CAST/ OR ALUMINUM), ALSO A SET OF HEADS THAT WILL INCREASE LOTS OF HP. MONEY AINT A PROBLEM SO HELP ME THANKS

302GTS · Dec 11, 2009

Budget, power goals, aluminum/iron? Give out some info on what you're looking for, otherwise you'll get 30 suggestions towards AFR and Trick Flows.

Shaolin Crane · Dec 11, 2009

View attachment 236734

Mustang5L5 · Dec 12, 2009

What's your budget?

There are various kits sold by Holley and Trick Flow which put all the parts you'll need together in one good kit. They are usually in the $2500-3000 range though....but easiest 1 stop place for 350HP.

If you want to spend less, you can try putting together the typical GT40/GT40P + Cobra Intake + cam combo that a lot of guys like to run. Put you in the 280-310 crank HP range for maybe a little over $1K

Shaolin Crane · Dec 12, 2009

Mustang5L5 said:
What's your budget?

There are various kits sold by Holley and Trick Flow which put all the parts you'll need together in one good kit. They are usually in the $2500-3000 range though....but easiest 1 stop place for 350HP.

If you want to spend less, you can try putting together the typical GT40/GT40P + Cobra Intake + cam combo that a lot of guys like to run. Put you in the 280-310 crank HP range for maybe a little over $1K

Damn Mike how do you read a thread like that and fight all urges to make fun?

Mustang5L5 · Dec 12, 2009

Shaolin Crane said:
Damn Mike how do you read a thread like that and fight all urges to make fun?

I'm a moderator. I can't.

I rely on your guys to do all the poking of fun....and then i come in and lay the smack down. That's fun right there.

Shaolin Crane · Dec 12, 2009

Mustang5L5 said:
I'm a moderator. I can't.

I rely on your guys to do all the poking of fun....and then i come in and lay the smack down. That's fun right there.

Funny I see other mods do it all the time...
But it must be fun to use the ban hammer though

Mustang5L5 · Dec 12, 2009

Okay, not i feel pressured

Let me google that for you

Shaolin Crane · Dec 12, 2009

Mustang5L5 said:
Okay, not i feel pressured

Let me google that for you

Perfect.
And now i am the official negative influence

liljoe07 · Dec 13, 2009

Posted via Mobile Device first off you are going about this all wrong. You should assemble the parts first, then choose a cam to.bring it all together.

HELP PICKING A SET OF HEADS

svtboy91

New Member

302GTS

If you need herpes, I'm your man!

Shaolin Crane

Banned

Mustang5L5

That is…until I whipped out my Bissell

Shaolin Crane

Banned

Mustang5L5

That is…until I whipped out my Bissell

Shaolin Crane

Banned

Mustang5L5

That is…until I whipped out my Bissell

Shaolin Crane

Banned

liljoe07

Similar threads

HELP PICKING A SET OF HEADS

New Member

If you need herpes, I'm your man!

Banned

That is…until I whipped out my Bissell

Banned

That is…until I whipped out my Bissell

Banned

That is…until I whipped out my Bissell

Banned

Similar threads

Privacy & Transparency

Privacy & Transparency