• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

help please

  • Thread starter Thread starter 85GTlover
  • Start date Start date Apr 21, 2004
8

85GTlover

New Member
Mar 20, 2004
704
0
0
Apr 21, 2004
#1
  • Apr 21, 2004
  • #1
If you have an h pipe with cats and just don't have the sensors hooked up are you losing a lot of power? Would it make a big difference to hollow the cats out? I don't want to wreck good cats for nothing,and thats all I have. I would just get an off road but funds are scarce.
 
S

ss93cobra

Founding Member
Apr 10, 2002
1,422
1
0
Wilmington NC
Apr 21, 2004
#2
  • Apr 21, 2004
  • #2
Unfortunately yes. The engine is going to run too rich. Why unplug them anyway? It doesn't gain anything other than a check engine light and driveability concerns.
 

blkstangman88

New Member
Apr 6, 2004
646
0
0
Apr 21, 2004
#3
  • Apr 21, 2004
  • #3
i believe just knock out the inner of the old cats would make it free flow like a O/R h-pipe, i kno wlots of ppl that have dont it and have gotten the same effect, they just want to be able to pass a visual inspection by cops, me i just bought a O/R h-pipe and put it on, when i go in for emisions a stick my stock pipe back on, takes like a n hour. ya ur car needs those sensors to tell the computer how much fuel to give it, with out itll run rich.
 
8

85GTlover

New Member
Mar 20, 2004
704
0
0
Apr 21, 2004
#4
  • Apr 21, 2004
  • #4
The MAC H pipe with cats came with the car I got them off now to fix up under the car. They were not connected to anything. I plan on removing my emissions as it is almost 20 and I think I can get away with it now. I see they are not cheap and do not want to destroy expensive cats. I would rather trade them to someone who could use them than wreck them.
 
You must log in or register to reply here.

Similar threads

Engine Keeping O2 sensors lit with long tube headers
  • keel
  • Jul 30, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
164
Fox 5.0 Mustang Tech Friday at 8:04 PM
Qtrhrse23
Problems after exhaust install and 02 harness
  • djj62478
  • Jul 2, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
39
Views
591
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
M
Please help me identify this.
  • MattyB77
  • Jul 2, 2026
  • The Welcome Wagon
Replies
3
Views
138
The Welcome Wagon Jul 4, 2026
gkomo
C
Need MIL Eliminators?
  • crazyone64
  • May 18, 2026
  • SN95 4.6L Mustang Tech
Replies
3
Views
194
SN95 4.6L Mustang Tech May 21, 2026
GOvert
G
T
Electrical Brown Connector #31
  • ta66
  • Jul 26, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
107
Fox 5.0 Mustang Tech Jul 30, 2026
ta66
T
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?