• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Help! Turn Signals Not Working But Hazards Do!

  • Thread starter Thread starter Liquidshadow22
  • Start date Start date May 19, 2005
L

Liquidshadow22

New Member
Apr 9, 2003
69
0
0
May 19, 2005
#1
  • May 19, 2005
  • #1
Hey guys,

I'm praying someone here can guide me in the right direction with this because all my attempts have failed so far.

Basically, I bought this 92 GT with 500rwhp and the guy gutted a lot of stuff so I've been working nonstop on this car for the past couple of days trying to get it ready to pass inspection.

The big problem right now is that the turn signals don't work. What I mean is that when I pull the turn signal lever, no blinking comes on in the dash and no lights outside either, and no clicking sound.

However, when I turn the hazards on, the turn signals work and everything lights up, both inside and out.

Today I switched my friend's 88GT turn lever in for mine. No difference.

I then went out and bought a new flasher and replaced the one in the fuse box. No difference here either. I've been getting a lot of mixed advice here.

I called up dallasmustang and they said that the turn signal flasher and hazard flasher are the same thing, meaning there is only one flasher. But I have I heard from a few people that there are 2 different ones. I took out the seat and was on my back looking for this damn thing but I looked everywhere and there is not a second one. I will be taking pictures so that maybe someone can point me in the right direction.

Any suggestions?

Jason
 

whtpny

New Member
Dec 8, 2002
338
0
0
Spokane WA.
May 19, 2005
#2
  • May 19, 2005
  • #2
Ok let's just see if we can straighten a few things out here. There are 2 different flashers for the car. The hazards flasher is the one in the fuse panel. The turn signal flasher is located above the fuse panel on the instrument reinforcement panel. Check and replace the correct one to see if that works first. Next or whichever order you choose, check the fuse in spot # 5 in the fuse panel it is a 15 amp fuse. Never trust how it looks just replace it. If those do not work then we will from there tracing power.
 
L

Liquidshadow22

New Member
Apr 9, 2003
69
0
0
May 19, 2005
#3
  • May 19, 2005
  • #3
Thanks a bunch. I'll do that first thing in the morning. I want this to be fixed.

Which part is the instrument reinforcement panel exactly?

I'll post up how things turn out.

Jason
 

whtpny

New Member
Dec 8, 2002
338
0
0
Spokane WA.
May 19, 2005
#4
  • May 19, 2005
  • #4
Directly above the fuse panel. Sometimes they take a bit of searching but it is there.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
May 20, 2005
#5
  • May 20, 2005
  • #5
Whtpny hit it pretty much on the head.

FWIW, earlier model years (87-89 at least) had TS flashers stuck in any number of places in the dash. I did not know that they finally found one spot for them. just something to remember if you cant find it.

good luck.
 
L

Liquidshadow22

New Member
Apr 9, 2003
69
0
0
May 20, 2005
#6
  • May 20, 2005
  • #6
i cant find it. I'm taking the entire dash out. I have to solve this.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
May 20, 2005
#7
  • May 20, 2005
  • #7
other places that TS's have been found: under the dash between the column and center console, behind the radio and under/behind the glovebox.

good luck.
 
S

speed1972

Founding Member
Mar 13, 2002
891
0
16
Denver, CO - Buckley AFB
May 20, 2005
#8
  • May 20, 2005
  • #8
If the guy hacked it up, then it is very possible that you have a grounded wire.... I'd start with the fuse.... Get a test light, and trace the wiring also, start at the fuse box and work your way to the switch.....

Larry
 

OL' WHITEY

New Member
Jan 28, 2004
273
0
0
Weddington, NC
May 20, 2005
#9
  • May 20, 2005
  • #9
Here's something to check...Does your heat/ac fan work? If you jiggle the key in the steering lock, can you get fan/signals to work for a second or two? It is a very common problem for the ignition switches to go bad on our cars. When this happens, loss of signals and fan motor seems to be the first sign. If you determine that this is the problem, take the cover off the steering column and replace the ignition switch. Now, I don't mean the steering lock (where you put the key). It's a block bolted to the side of the column where all the wires terminate. The switch is basically two halves with a copper mechinism that slides back and forth inside as you turn the key, making contact with the necessary wiring. It's a cheap fix and not too hard. The switch is affixed with two safety hex bolts. I had to use vice grips to get mine out. If you don't have a safety allen wrench kit, you'll have to either use vice grips or drill out the safety "bump" from the bolts then use a regular allen wrench. Good luck!
 
L

Liquidshadow22

New Member
Apr 9, 2003
69
0
0
May 20, 2005
#10
  • May 20, 2005
  • #10
haha heat/ac! there is none. all gone. I'm taking off the dash today so I will be taking pics.
 
1

1bad92lx

New Member
Mar 31, 2003
247
0
0
Close to lynchburg, VA
May 20, 2005
#11
  • May 20, 2005
  • #11
My 85 just did the same thing last week and it was the turn signal switch. I bought one from Advance Auto for $26 and it fixed my problem. Just thought I would let you know before your chasing all the wrong things.
 
You must log in or register to reply here.

Similar threads

T
Need help 67 hazard flashers not working
  • THS70
  • Jan 21, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
15
Views
732
1965 - 1973 Classic Mustangs -General/Talk- Jan 29, 2026
Noobz347
A
1966 Mustang coupe / Brake lights and left rear turn signal not working.
  • ArizonaRob1966
  • Nov 3, 2025
  • Classic Mustang Specific Tech
Replies
2
Views
363
Classic Mustang Specific Tech Dec 24, 2025
Mcmahst
D
Turn signals work only with ignition on & Engine off.
  • DienstXIV
  • Jul 2, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
590
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 7, 2025
DienstXIV
D
9
Fox Hazards not working but blinkers do
  • 93fox_c
  • Dec 2, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
200
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 2, 2025
AeroCoupe
Z
Turn signals not working at all, but hazards do. 91 fox LX 5.0
  • Zeke1995
  • Jun 22, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
757
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 12, 2025
Jarhead67
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?