• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

HELP!! Two questions about leaking BBK Headers

  • Thread starter Thread starter stang1986GT
  • Start date Start date Sep 26, 2008

stang1986GT

Member
Mar 30, 2005
143
0
17
Charleston, WV area
Sep 26, 2008
#1
  • Sep 26, 2008
  • #1
I have an 86 GT, BBK shorty headers. I cannot get them to quit leaking at the collectors! I have the nuts tightened as tight as I can get them, and I'm afraid to go more without breaking off the stud. (By the way, I posted in another thread trying to find the right sized nut, 7/16 was too small, 1/2 was just a tad too big, so I had to use a 12mm...why would BBK use metric? Perhaps someone changed the studs, who knows...anyway)

I can feel exhaust blowing by ever so slightly at the collector. Nothing is cracked or bent. I was thinking I'll loosen the nuts up and push up on the H-pipe with a jack and then retighten so I'm not trying to pull the pipe up just by tightening the nuts...anyone have any thoughts on this?

#2: Anyone have any tips or tricks on how to tighten the header bolts up top? I think mine are tight, but I can't hear if there any leaks up there because the collector is so loud. I can't get a wrench in there, and no combination of swivel or wobble extension will work. How did you guys make sure your heads are tight? How can you even get in there?

Thanks!
 

riceslayer302

Banned
Oct 3, 2006
0
1
0
CT
Sep 26, 2008
#2
  • Sep 26, 2008
  • #2
make sure the h-pipe is pushed far enough foward. it should fit well. ive never had problems with bbk headers. i have a set in my garage ill go check the nut size if you'd like.
 

stang1986GT

Member
Mar 30, 2005
143
0
17
Charleston, WV area
Sep 26, 2008
#3
  • Sep 26, 2008
  • #3
riceslayer302 said:
make sure the h-pipe is pushed far enough foward. it should fit well. ive never had problems with bbk headers. i have a set in my garage ill go check the nut size if you'd like.
Click to expand...

Yea, if you could do that, that would be great. So you think I should just simply unbolt the H-pipe in the back and tighten up the collectors some more?

I bought these headers from Ebay, and I just assumed they used the same size nut as the factory pieces. I didn't even think to check.
 
S

Sicarius428

Active Member
Jan 6, 2004
2,085
5
49
Sep 27, 2008
#4
  • Sep 27, 2008
  • #4
BBK's shorties are a little wide at the collectors. Equal lengths are about an inch wider than stock. I used a piece of wood to pry the H apart and bolted it down evenly so i fit in the cup. I have a set of headers that the ball collector got bent up pretty good so be careful.
Kevin
 

93 LX

Founding Member
Jun 2, 2000
3,081
3
0
Norwalk, CA.
Sep 27, 2008
#5
  • Sep 27, 2008
  • #5
take it to a shop and have them tighten it up. I did this on both of my Stangs. No leaks
 
You must log in or register to reply here.

Similar threads

D
Exhaust Difficulty of fixing exhaust leak at manifold
  • dqureshi06
  • Aug 27, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
347
Fox 5.0 Mustang Tech Aug 28, 2026
General karthief
Engine Keeping O2 sensors lit with long tube headers
  • keel
  • Jul 30, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
277
Fox 5.0 Mustang Tech Aug 21, 2026
Qtrhrse23
J
Exhaust manifold to Y-pipe nut & stud dimensions?
  • joeybuddy96
  • Jul 7, 2026
  • SN95 V6 Mustang Tech
Replies
2
Views
214
SN95 V6 Mustang Tech Jul 9, 2026
joeybuddy96
J
R
bbk shorty header to mid pipe gasket
  • randyyy
  • Sep 29, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
4
Views
501
1996 - 2004 SN95 Mustang -General/Talk- Sep 29, 2025
randyyy
R
A
Resolved 302 oil leak when running
  • AlexM556
  • Sep 8, 2026
  • Classic Mustang Specific Tech
  • 2
Replies
36
Views
1K
Classic Mustang Specific Tech Nov 1, 2026
manicmechanic007
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?