HELP!!!! Wheel fitment issues!!

CTNotch

New Member
Sep 21, 2005
1
0
0
I have a 1992 Notch with the Baer 13" front 12" rear disc 5-lug conversion. I have OE size '03-'04 SVT wheels. The wheels in front hit my coil-overs and do not clear the baer hub in the center hole. If I get a spacer, the wheel studs won't be long enough for the lug nut to grab thread.

I know I have the option of getting longer wheel studs and spacers, but maybe someone in here has run into the same problem and has a speedy solution.

PLEASE HELP!
 
CTNotch said:
I have a 1992 Notch with the Baer 13" front 12" rear disc 5-lug conversion. I have OE size '03-'04 SVT wheels. The wheels in front hit my coil-overs and do not clear the baer hub in the center hole. If I get a spacer, the wheel studs won't be long enough for the lug nut to grab thread.

I know I have the option of getting longer wheel studs and spacers, but maybe someone in here has run into the same problem and has a speedy solution.

PLEASE HELP!

I have the fix for you. You can buy wheel spacers that bolt to your current hub and have lug studs on them as well, so its like a hub extension instead of a wheel spacer. If you phone your local high end tire dealer they should have something like this.

Good luck.
 
SPEED FREAK said:
I have the fix for you. You can buy wheel spacers that bolt to your current hub and have lug studs on them as well, so its like a hub extension instead of a wheel spacer. If you phone your local high end tire dealer they should have something like this.

Good luck.


I used these wheel adapters on my '68 for years with no problems. The only catch is that they can't be any thinner than 3/4" thick for safety reasons.