help with install

mustangcam · Aug 26, 2006

so i'm outside trying to install a mac cat-back on the cobra and it all seems pretty simple, just unbolt the old one and slide it off of the rubber hangers. but i can not for the life of me get those rubber things off! the hangers that go through them have a little cap on the end so the rubber things cant just slide off. how did you guys get those things off?

nwapache · Aug 26, 2006

try some lube....wd40, or even dish soap

ACSPONY · Aug 26, 2006

I had a sawz-all and just cut the caps off. I wasn't going to re-install the factory stuff so it didn't matter. Dish soap, like was mentioned, should do the trick.

mustangcam · Aug 26, 2006

i am not gonna re-install the factory stuff either but will i need those caps to install the mac system? i have a sawz-all so i was already considering that route.

ACSPONY · Aug 26, 2006

The new cat-back should have its own hangers/caps. WD-40 will help ease the new hangers in.

Kilgore Trout · Aug 26, 2006

Work them back and forth and use wd-40 or pb blaster. They will come off but it is difficult. Exhaust work sux

Ford Racing actually sells a tool just for this:

http://www.fordracingparts.com/parts/part_details.asp?PartKeyField=8229

View attachment 445250

JTAM963 · Aug 26, 2006

If I bought a Mac Hpipe for my Auto stang..would it fit and bolt in directly in place or the stock hpipe? I was wondering if a prochamber would too.I want to do exhaust myself..and LTs soon...every1 has said only basic tools yet a load of time

Black'02 · Aug 26, 2006

I had the same problem when i installed exhaust. I dont know if you have or not but i removed the hangers from my car and was able to get more leverage that way to pull the exhaust out of the rubber hanger mount.

mustangcam · Aug 26, 2006

i got the old stuff by sawz-alling the caps on the end of the hangers that are attached to the stock pipes. but now i cant get the new hangers to go into those same rubber mounts. and another question, what kinda tool do i need to get to the bolt that attaches the stock h pipe to the headers? i cant get any of my wrenches to fit up there and be able to turn to take off the stock h. exhaust work is so frustrating because its so much more time consuming and tedious than it should be.

bullitt_2620 · Aug 26, 2006

You'll need a swivel end, maybe 2, extention, and a socket, 15mm I think.

Kilgore Trout · Aug 27, 2006

There is no work like exhaust work Remember you can always take it to an exhaust shop and have them finish the job or fix any exhaust leaks.

parkgoons · Aug 27, 2006

I must have gotten lucky when I did my exhaust, the rubber things cam off with only a minute or two of abuse. The first thing I did after jacking up the car was spray wd-40 on everything, every bolt, nut, rubber thing, you name it it was lubed. Let the WD-40 do its magic for 10 minutes or so then get some thick welding gloves or equivelent and use all your force and they'll come right off. You might want to get a buddy to help you pull the rubber the other way, although it can be done by your self.

mustangcam · Aug 27, 2006

well i got it all on today and i'm not sure if my tips stick out more than they are supposed to cuz they come out of the cut-outs like 4 inches. it actually looks really cool. but the sound is so much more than i was expecting! its such a low rumbly sound its not at all like the flows i have on my v6 tacoma. its sounds just plain mean.

JTAM963 · Aug 27, 2006

So did the Mac Hpipe bolt right into place of the stock hpipe? I welded in super 40s and was looking to put on a hpipe of some sort..and Ive heard mac produces a nice low rumble..and how much you pay for it? any1 else know if you can do Mac hpipe n the Mac Lts?

ACSPONY · Aug 28, 2006

MAC probably makes a shorty midpipe to fit their long tube headers. I don't know if they make a convertible mid like SLP though.

mustangcam · Aug 28, 2006

it was just a straight bolt on but the bolt were hard to get to. but its do-able. mac has a shorty h-pipe for those with lt's. its $170 at mustangtunint.com

BlackenedSVT · Aug 28, 2006

mustangcam said:
so i'm outside trying to install a mac cat-back on the cobra and it all seems pretty simple, just unbolt the old one and slide it off of the rubber hangers. but i can not for the life of me get those rubber things off! the hangers that go through them have a little cap on the end so the rubber things cant just slide off. how did you guys get those things off?

Yeah i remember those. Can't remember, but i'm pretty sure I just used a grinder on the heads and they slid right off after that

help with install

mustangcam

New Member

nwapache

New Member

ACSPONY

mustangcam

New Member

ACSPONY

Kilgore Trout

Fried or Broiled ?

JTAM963

New Member

Black'02

Member

mustangcam

New Member

bullitt_2620

Member

Kilgore Trout

Fried or Broiled ?

parkgoons

New Member

mustangcam

New Member

JTAM963

New Member

ACSPONY

mustangcam

New Member

BlackenedSVT

Active Member

Similar threads

help with install

New Member

New Member

New Member

Fried or Broiled ?

New Member

Member

New Member

Member

Fried or Broiled ?

New Member

New Member

New Member

New Member

Active Member

Similar threads

Privacy & Transparency

Privacy & Transparency