I'm so confused with the instructions that steeda provided. how the heck to you install this system I'm stuf with the part of removing the rubber bushing thing to install the firewall adjuster for the cable does anyone have any tech articals or any pictures showing what to do?
The only thing you may cut is the firewall opening on the car or possibly the bushing on the new cable. I have the cable and quadrant. Both work well, and provide enough adjustability by themselves. The adjuster is sort of a gimmick.
Well I took off the rubber bushing and there was some plastic under it so I didn't know what to do becasue the brass bushing on the firewall adjuster wouldn't fit around it. and the instructions didn't make much sense. they said "Pry the metal flange which bolts to the firewall off of the cable. Unhook the plastic coupler and pull it off the cable sheath. Cut through the coupler to remove it from the cable. Pull the rubber bushing (which was under the coupler) off of the cable. Place the bronze adapter bushing into the Cable Adjuster. Insert the clutch cable into the Cable Adjuster." the one that does make sense kinda of is the instructions for 82-93 they said "Pull the rubber bushing off of the end of the clutch cable where the cable meets the firewall. File the 4 small bumps off of the end of the clutch cable (adjustable cables and 82-93 stock cables only). Insert the clutch cable into the Cable Adjuster." well my main problem now is the cable is adjusted as far as It can go and the clutch won't engauge so I can't get it into gear only if I turn it off put it in gear and start it in gear the are then starts to move forward. so at this point I don't know what to do I could install the stock clutch cable or I could go out and get a new adjustable cable ASAP. Any ideas?