HELP WITH MY 1/4 WINDOWS

[Demolisher]

Well ive been wanting to drop my ragtop but it looks just ugly with my 1/4 windows up see the problem is my little windows will go down like half way then i have to push them the rest of the way down but see the real problem is when i click the button to pick the 1/4 windows up i just here the motor like its slippin or something so i click the button with one hand and i get some pairs of pliers and pick them up someone plz help me i hate having to streach and click the button with my left hand and try to pick up the window with my right hand plz guys i hate always having to use pliers lol

 

[Bosko5.0]

This should help http://forums.stangnet.com/showthread.php?t=703156 I know 100% they are the same you can order new bushings from 50restos.com or you can get them from autozone in the help section. While your replacing that side do the other side and save time..


steps.

1). remove seat bottom.
2). remove seat top 10mm socket.
3). remove that long piece of plastice that runs along right next to seat. (forgot its name)
4). remove panels.
5). remove the black panel, its held in by that black sticky stuff.
6). undo 3 8mm bolts to remove motor.
7). take apart motor.
8). to put all back together, repeat 7,6,5,4,3,2,1.

 

[Demolisher]

hey do u all guys no what would be the size of the nuts used? i think there like a 3/8 no?

 

[Blackened302]

i think they're 3/8 or 1/4 inch (if they're the same as the bushings from the front window motor).

you can get teh bushings at Advance--in the HELP! sections... they're $8.

 

[Bosko5.0]

I thought the nuts were 7/16" but not sure