• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Help with nitrous

  • Thread starter Thread starter stevesLX
  • Start date Start date Apr 27, 2007

stevesLX

Member
Nov 12, 2006
373
0
16
cincinnati
Apr 27, 2007
#1
  • Apr 27, 2007
  • #1
I just got my nitrous hooked up and I have been told that I need to watch my pressure in my bottle. I was told that my pressure in my bottle should be between 950-1000 when I go to spray it. Well I turned the bottle on just before and its only at 600. The bottle is full and its been full for about 3 days now. So how do I get my pressure up to 950-1000 if that is where it really needs to be? I intended to use this tomorrow at the track. Its a Zex dry kit and I am using a 75 shot on it right now. I was told that if I spray it at anything under 950-1000 that it would spray to much and it would lean the motor out.
 

bill302

Active Member
Nov 2, 2005
2,131
1
46
alabama,gadsden
Apr 27, 2007
#2
  • Apr 27, 2007
  • #2
yes the pressure should be at 950 to 1050 psi i have mine set at 1050 and to obtain this pressure you will need a bottle heater and a pressure switch which turns the heater off when pressure reaches the set pressure you set with the switch which would be 950-1050 psi....


heres a picture of a bottle heater.


picture of a pressure switch and fitting you will need...
 

stevesLX

Member
Nov 12, 2006
373
0
16
cincinnati
Apr 27, 2007
#3
  • Apr 27, 2007
  • #3
Well theres no way I can get those by tomorrow so I know its a tv show but I have seen guys on pinks using torchs to heat there bottles up. Can I do that or is that dangerous. And if I can do I need to leave the bottle hooked up and turned on so I can monitor the pressure guage or what?
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Apr 27, 2007
#4
  • Apr 27, 2007
  • #4
Well yes I guess you can torch your bottle. Nitrous isn't explosive although it is a oxident. I have never torched a bottle. And I doubt I ever will. Bring your bottle inside. Store it somewhere warm. Get it in the sun when you are at the track. OH nitrous does go stale. I have nodoubt if you have had nitrous in the bottle for 3 years it has gone stale. You can know by just bleeding of some when it is disconnected. If it isn't a white spray then it has gone stale. It maybe ok.
 

RYC CUKR

Founding Member
May 19, 2002
1,437
1
38
Orlando
Apr 27, 2007
#5
  • Apr 27, 2007
  • #5
The best thing to do is put a pressure gauge on it and put it in the sun and keep an eye on the gauge so you don't over pressure it. Then put a bottle blanket on it or wrap it in something to keep it at that temp as much as possible.

Have I seen guys torch bottles, yes. Would I do it, no. While nitrous isn't flammable I would be worried about weakening the bottle in a certain area and then the possibility of it rupturing. Not a good scene. I have seen guys torch bottles, put them on the the little coleman propane grills and turn them and all sorts of other stuff none of which I would do.

The bottle heater and pressure switch are the best way. You can dial in your pressure and it will automatically turn itself on and off to maintain it. I use the same setup on my 93.
 

Aliate X

Member
May 9, 2005
602
1
18
Rockland NY
Apr 28, 2007
#6
  • Apr 28, 2007
  • #6



afterwards wrap it up in a few blankets, will stay warm for about 3 hrs.
 
T

TokyoJoe

New Member
Mar 25, 2007
179
5
0
Apr 28, 2007
#7
  • Apr 28, 2007
  • #7
^^damn, never thought of that
 

Mustang78

New Member
Feb 8, 2006
486
0
0
Aberdeen, WA
Apr 28, 2007
#8
  • Apr 28, 2007
  • #8
you could always cuddle with it

~Mark~
 

DMAN302

My mom says thanks for the pearl necklace.
Nov 8, 2003
2,120
2
59
windsor, Canada
Apr 28, 2007
#9
  • Apr 28, 2007
  • #9
The zex control unit works to ensure pressure problems are resolved regardless of bottle pressure..they use the "active fuel control" feature to richen up the fuel delivery to assist.
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Apr 28, 2007
#10
  • Apr 28, 2007
  • #10
Mustang78 said:
you could always cuddle with it

~Mark~
Click to expand...

Wife gets mad when I bring it to bed with me.
 
N

Npower

New Member
Oct 15, 2006
16
0
0
Camarillo, Ca
Apr 28, 2007
#11
  • Apr 28, 2007
  • #11
you could find a heating pad from a drugstore or med supply and wrap it around the bottle (plug in style) till it heats up and the psi is around 1k. It will work till you can get a good bottle heater, I guess a guy could go as far as buying a cheep ac->dc converter and use the heating pad all the time, ghetto but it would work if you need one asap
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Apr 28, 2007
#12
  • Apr 28, 2007
  • #12
Npower said:
you could find a heating pad from a drugstore or med supply and wrap it around the bottle (plug in style) till it heats up and the psi is around 1k. It will work till you can get a good bottle heater, I guess a guy could go as far as buying a cheep ac->dc converter and use the heating pad all the time, ghetto but it would work if you need one asap
Click to expand...

LOL sounds like something my bro inlaws would do. There redneck dodge guys.
 
N

Npower

New Member
Oct 15, 2006
16
0
0
Camarillo, Ca
Apr 28, 2007
#13
  • Apr 28, 2007
  • #13
86bluecobra said:
LOL sounds like something my bro inlaws would do. There redneck dodge guys.
Click to expand...

Yeah, I saw it when I moved from Toronto to Texas years ago, it was funny as all get out but it worked.
 
You must log in or register to reply here.

Similar threads

T
Engine Need help figuring out misfire and backfire
  • trystancounts
  • Sep 25, 2025
  • Fox 5.0 Mustang Tech
Replies
8
Views
442
Fox 5.0 Mustang Tech Sep 26, 2025
Noobz347
Engine Looking for suggestions and or ideas
  • PonyGTrider
  • Aug 25, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
735
Fox 5.0 Mustang Tech Sep 7, 2026
PonyGTrider
Need some camshaft guru advice on power loss from supercharger to nitrous
  • TTSaleen
  • Dec 1, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
18
Views
985
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 29, 2025
revhead347
Engine Light throttle miss
  • Dontknowchit
  • Jul 7, 2025
  • Fox 5.0 Mustang Tech
Replies
1
Views
236
Fox 5.0 Mustang Tech Jul 7, 2025
AeroCoupe
J
can you use the heads off a H O 302 to put on a regular 302 engine
  • Jan H
  • Feb 25, 2026
  • Other Auto Tech
Replies
6
Views
606
Other Auto Tech May 17, 2026
nickyb
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?