• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Help with oil problems.

  • Thread starter Thread starter unmarkedcoupe
  • Start date Start date Aug 16, 2006

unmarkedcoupe

New Member
Apr 23, 2006
9
0
0
Aug 16, 2006
#1
  • Aug 16, 2006
  • #1
OK ill start from the begining I have a 89 coupe EFI with bolt ons stock 302 internals.Well the latest bolt ons where A Holly sytemax intake While doing the intake added a TFS Stage 1 cam.THe problem is i keep blowing oil out the pcv valve.Well it was first ran to intake wich made alot of smoke.So i went and got another brand new Pcv and still was doing it.So we ran a rubber hose from Pvc to open air to see what it would do.Well it Jus shoots out the oil.THios only happens when i give it almost or full acceleration.

What causes this?

If it were crank case pressure wouldent it have done it on stock intake also and blow out smoke?I had not even the smallest amout of smoke ever before.So that to me rules out crank case due to the fact it wasent bad before.

Any ideas at all?
 
9

90vert67coupe

New Member
Aug 18, 2006
1
0
0
Tampa, FL
Aug 18, 2006
#2
  • Aug 18, 2006
  • #2
I have the same problem. Ever since I put the TFS on. have and in-line separator between the PCV valve and the intake and still get oil. The problem it seems to cause is oil soaks the gasket between the upper and lower intake at the back 2 runners after a couple hundred miles. This leads to a, what I assume is a vacuum leak between those runners, miss at higher rpms. If I replace the gasket, it goes away until the gasket soaks again. I also did not have this with the stock intake. All parts (PCV) have been changed. All baffles in place.

Not trying to hijack, but have the same problem, researched through the forums and tried the various fixes which have not worked yet.
 
You must log in or register to reply here.

Similar threads

B
New Engine Oil Problem
  • BubbaG
  • Aug 7, 2022
  • Other Auto Tech
Replies
0
Views
1K
Other Auto Tech Aug 7, 2022
BubbaG
B
Engine Is there something wrong with my engine or is this just normal modded fox behavior?
  • AnthonyA1234
  • Aug 30, 2022
  • Fox 5.0 Mustang Tech
Replies
6
Views
2K
Fox 5.0 Mustang Tech Aug 30, 2022
90sickfox
Engine A few issues with my new 88 Foxbody that i couldnt find definitive answers to....
  • AydenTv
  • Mar 6, 2022
  • Fox 5.0 Mustang Tech
Replies
6
Views
3K
Fox 5.0 Mustang Tech May 23, 2022
7991LXnSHO
M
Engine Oil Shooting out of dip stick
  • Mrg2783
  • Nov 4, 2020
  • Fox 5.0 Mustang Tech
Replies
2
Views
2K
Fox 5.0 Mustang Tech Nov 6, 2020
7991LXnSHO
B
1982 Mustang 5.0 oil leak
  • bowman82
  • Jun 7, 2020
  • Fox 5.0 Mustang Tech
Replies
3
Views
847
Fox 5.0 Mustang Tech Jun 7, 2020
General karthief
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?