Help with pcv vavle issues

Doubledown20

New Member

Jun 3, 2003

239

0

0

Sacramento, CA

Nov 24, 2003

#1

• Nov 24, 2003

• #1

Help with pcv valve issues

engine is pulling 15 on the vacuum gauge out of the manifold. I connect to power brakes and fuel pressure regulator and everything is fine but when i plug the pcv valve in my brake booster does nothing.. whats the deal? though i had a leak but sicen the pcv is on teh back of the lower intake i figure that would effect the vacuum with or with out the pcv vacuum plugged in.. any help is greatly appreciated.

 

94GTLaserRC

Squint as you approach, lest you be blinded by my

15 Year Member

May 7, 2002

11,178

13

89

Ernan Says "here it comes... dushbag"

Dec 21, 2003

#2

• Dec 21, 2003

• #2

WOW!!!

No replies on this for a month?
RC

 

tvmango

New Member

Oct 27, 2003

667

0

0

bradenton florida

Dec 21, 2003

#3

• Dec 21, 2003

• #3

I really don't understand your ?, your pcv valve in your brake booster what???

 

ahuge1

Member

Jun 3, 2003

208

0

16

LUBBOCK,TX

Dec 21, 2003

#4

• Dec 21, 2003

• #4

??

 

B

billheis

New Member

Jul 17, 2003

117

0

0

Longwood, FL

Dec 21, 2003

#5

• Dec 21, 2003

• #5

Hey double, You didnt mention what intake you ahve or I just didnt look anyway the factory goes the back side for brake booster, fpr, and egr. Then to the front side of the intake for the PCV and fuel vapor. If your trying to t-together or running the pvc fron the same branch it will act like a big vacuum leak. I know I did it when I put on my TFS. On the branch that screws into the intake run the brake on the 3/8 pipe and the fpr and egr on the two small one . Then on the front side of you intake (underneath of the top) thereis another 3/8 pipe hook the pvc to it youll have to run about two feet of hose. Hope this answers your ?
Bill

 

94GTLaserRC

Squint as you approach, lest you be blinded by my

15 Year Member

May 7, 2002

11,178

13

89

Ernan Says "here it comes... dushbag"

Dec 22, 2003

#6

• Dec 22, 2003

• #6

I am ?????????

I have a Typhoon (like Edelbrock), and IM having a lot of oil spraying all over the place. IM not even REALLY sure where the exact spot is that the oil is leaking from!
RC

 

B

billheis

New Member

Jul 17, 2003

117

0

0

Longwood, FL

Dec 22, 2003

#7

• Dec 22, 2003

• #7

I'm afraid if you didn't have any vacuum at the pcv youve probably blown out the end seals at the intake. Try to gat a small mirrow down the back off the intake and look at mating surface between the intake and block. On your typhoon (edel copy) turn the top manifold upside down and youll have a place to hook up vacuum hose on the front side of the center on the back side of center is where your vac tree for the brakes and two small line comes out