• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

HELP!!!

  • Thread starter Thread starter revelationz
  • Start date Start date Nov 19, 2004

revelationz

New Member
Sep 10, 2004
19
0
0
Evansville, IN
Nov 19, 2004
#1
  • Nov 19, 2004
  • #1
ok im sure yall have seen too many of this same exact quetion but i need the answer for what i have and i am so lost and need this car running soon! i've had a vibration after my clutch install for awhile now, and ive came to to the conclusion either i didnt line the transmission shaft up in the the pilot bearing right, or that clutch i have now just isnt strong enough(bought a cheap 1 from orielys). i pulled it all out for the 11th time now and the numbers on the flywheel reads as followed:
E1ZR-3380-AA
I was told in another forum it was an 81-85 flywheel i believe. im going to go ahead and order a high performance clutch kit being im pushing some serious horsepower for being N/A that is. now, which clutch should i get? part numbers would be real nice so i dont mess things up again.

thanks,
ryan
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Nov 19, 2004
#2
  • Nov 19, 2004
  • #2
Well what is your N/A combo and do you daily drive this car?

That would help pick out the right clutch for you...

Not knowing what you have but I have King Cobra clutch on my "300"rwhp car...it seems to be doing fine...
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
33
129
Nov 19, 2004
#3
  • Nov 19, 2004
  • #3
um yeah, we need to know what year of car you have, what motor (stroker?) and so on.

and what is it doing and when (vibes only while moving?, etc)
good luck.
 

revelationz

New Member
Sep 10, 2004
19
0
0
Evansville, IN
Nov 20, 2004
#4
  • Nov 20, 2004
  • #4
i dont know exactly what it all has done to it. being that it was my fathers before he passed away. it is a 1980 302 bored .030, keith black pistons (not sure what crank it has all i know is that it took $1200 out of my dads pocket), its got aftermarket connecting rods (not sure what brand or kind), im running edelbrock 351 heads, edelbrock performer manifold, edelbrock 650 carb for the time being (soon to be a 650 holley double pumper), it has a brand new t5 tranny, 8.8 rear end with 3:27 gears (also for the time being, soon to be 3:73 or 4:11), its got new rocker arms (not sure what brand or kind also), .520 lift crane cam i believe, msd ignition, thats pretty much all i can think of right now i do know that it makes 7.3 passes in the 1/8 mile all day long. and yes it is/will be a daily driver.

as for the vibes. they happen in every gear even neutral weather or not the clutch is in or out, and it still does it sitting still. it doesnt start vibrating until 2000-2500 rpm and on. ive had the flywheel machined twice, replaced pilot bearing, switched out harmonic balancers, intalled a firewall adjuster, and everything else "looks" good. the clutch was an oem replacement from orielys i think it was $120 for the whole kit. I think that covers it all :S
thanks again,
ryan
 

revelationz

New Member
Sep 10, 2004
19
0
0
Evansville, IN
Nov 20, 2004
#5
  • Nov 20, 2004
  • #5
ah i forgot it is a 1984 gt the body that is. and from what ive been told the crank has been switched out to a 81 or higher crank.
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Nov 21, 2004
#6
  • Nov 21, 2004
  • #6
Sounds like a nice street setup...glad your trying to take care of it

Anyways...I'm making some more power than you and I have a King Cobra clutch and it holds up find and I drive every single day (it is my only vehicle) back and forth to school and work and misc. things...

On the vibes...it could be the driveshaft (if you were rolling and then put it in neutral)...or bad fan setup (clutch/broken)...balancer...motor mounts...tranny mounts...etc...

Good Luck man...
 
You must log in or register to reply here.

Similar threads

S
Drivetrain 8.8 Pinion and 302 rear main seal leaks after replacing. 93 5.0 with t-5
  • Steigy4827
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
10
Views
595
Fox 5.0 Mustang Tech Apr 1, 2026
Steigy4827
S
J
Progress Thread Family member 1989 GT- Backstory and updates
  • JRC99
  • Apr 19, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 26, 2025
JRC99
J
SN Mustang Magnum T56 swap
  • revhead347
  • May 24, 2024
  • 1994 - 1995 Specific Tech
Replies
5
Views
6K
1994 - 1995 Specific Tech Dec 16, 2024
revhead347
Significant Vibration After Clutch Replacement
  • Ryu
  • Dec 19, 2022
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 20, 2022
revhead347
M
03 Mustang GT 4R70W trans help!
  • Motox852
  • Feb 20, 2023
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
2K
1996 - 2004 SN95 Mustang -General/Talk- Feb 21, 2023
Motox852
M
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?