• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Engine Help

  • Thread starter Thread starter Gen4Stang
  • Start date Start date Aug 26, 2016

Gen4Stang

Active User
Jul 30, 2016
16
0
1
MICHIGAN
Aug 26, 2016
#1
  • Aug 26, 2016
  • #1
Having issues with stalling when makin a left turn, in second when turning but clutch fully pressed. Could it be timing or my carb not getting enough fuel.. I'm not car savvy so layman terms are OK. LOL
Thank you...
 

RaggedGT

Been here over a DECADE and still no CT
Mod Dude
Jul 20, 2014
4,742
3,193
203
Taylorsville ky
Aug 26, 2016
#2
  • Aug 26, 2016
  • #2
If you could, give way more details on your car- I'm guessing that it's a mustang ( and looking at your profile pic an SN mustang ) but what year is it,what motor is in it? Is it in fact carbed? What mods? Etc etc etc lol. Post up the info,add a bunch of pics, and you will start getting people to offer up advice and recomendations ..
 

Gen4Stang

Active User
Jul 30, 2016
16
0
1
MICHIGAN
Aug 26, 2016
#3
  • Aug 26, 2016
  • #3
Its a 95 mustang with a 1985 302. It has an Edelbrock 1406 carburetor with a elelbrock 289 performer intake . It was converted from a V6 to a V8 whic I'd imagine is a process in itself. Had it for 3 years and just started getting this issue.
 

Attachments

  • 20160826_143423.webp
    390 KB · Views: 173
  • 20160826_140431.webp
    331.5 KB · Views: 178

jozsefsz

15 Year Member
Aug 11, 2013
1,243
332
124
Cleveland OH Area
Aug 26, 2016
#4
  • Aug 26, 2016
  • #4
Could be vacuum leaks, fuel pressure / clogged filter or more likely float level, bad fuel, clogged jets, timing, plug condition, clogged cats if present. Pretty standard stuff for a carb-equipped car. Diagnose with a timing light and a vacuum gauge. You might actually have better success posting this to one of the classic-car forums where folks are more familiar with carbs.
 

Gen4Stang

Active User
Jul 30, 2016
16
0
1
MICHIGAN
Aug 26, 2016
#5
  • Aug 26, 2016
  • #5
Thanks for your input I appreciate it.
 

RaggedGT

Been here over a DECADE and still no CT
Mod Dude
Jul 20, 2014
4,742
3,193
203
Taylorsville ky
Aug 26, 2016
#6
  • Aug 26, 2016
  • #6
@madmike1157 @Davedacarpainter @Boosted92LX seem like pretty knowledgeable people where carbs are concerned. If they're not busy-they may have some ideas
 

Boosted92LX

It's only an inch or two. What's the big deal?
15 Year Member
Dec 19, 2010
5,721
4,244
224
Aug 26, 2016
#7
  • Aug 26, 2016
  • #7
I can tell you I had a used edelbrock carb that came on a pickup I aquired, and the floats loved to stick on that thing. Even worse than a holley that's been through the wringer, which I didn't think was possible. Those edelbrocks are copies of the old carter afb which a lot of guys older and more knowledgeable than me call JUNK.. lol. My experience with them made me want to believe it. Is the car smoking when it stalls, out of the exhaust? Can you smell raw fuel in the tailpipes? If so, that may be it. If not, check the above mentioned symptoms. They are all sound suggestions.

P.S. After rebuilding that eddie carb and still having the needles/floats stick like mad, I bought the cheapest summit brand 600 vacuum secondary 4 barrel they sold, which is a copy of an old holley. It purred like a kitten, and the eddie went in the scrap metal pile.
 

Gen4Stang

Active User
Jul 30, 2016
16
0
1
MICHIGAN
Aug 26, 2016
#8
  • Aug 26, 2016
  • #8
Thank you so much, I haven't noticed any smoke from the pipe or raw fluid smell but honestly never looked. I'm gonna recreate the situation tomorrow and I'll keep my eyes on it.. thanks for taking the time to talk it means a lot.
 

jozsefsz

15 Year Member
Aug 11, 2013
1,243
332
124
Cleveland OH Area
Aug 27, 2016
#9
  • Aug 27, 2016
  • #9
You're welcomed - two more things popped into my mind from long ago when I owned a carb'd car with emissions equipment. I don't see an EGR valve, but a sticking one can cause problems. I think I see a PCV valve, definitely make sure that's clean / moves freely. Either one of those can cause stalling issues. Good luck!
 

Gen4Stang

Active User
Jul 30, 2016
16
0
1
MICHIGAN
Aug 27, 2016
#10
  • Aug 27, 2016
  • #10
jozsefsz said:
You're welcomed - two more things popped into my mind from long ago when I owned a carb'd car with emissions equipment. I don't see an EGR valve, but a sticking one can cause problems. I think I see a PCV valve, definitely make sure that's clean / moves freely. Either one of those can cause stalling issues. Good luck!
Click to expand...
Wow didn't think of that, thank you and luck I will need ..haha
 

90sickfox

Wasn't a pretty sight...and I've got big hands
SN Certified Technician
Mar 2, 2015
6,945
5,816
213
Aug 27, 2016
#11
  • Aug 27, 2016
  • #11
I ran an edelbrock 1406 and edelbrock intake for 5 years daily driven with no issues.

Sounds like the baffle may have come loose in your gas tank. I had a similar issue in the past with left turns causing my car to stumble.

Where's the fuel pump in in your car ? If its not in the tank then this isn't a probable solution for you.
 

Gen4Stang

Active User
Jul 30, 2016
16
0
1
MICHIGAN
Aug 28, 2016
#12
  • Aug 28, 2016
  • #12
90sickfox said:
I ran an edelbrock 1406 and edelbrock intake for 5 years daily driven with no issues.

Sounds like the baffle may have come loose in your gas tank. I had a similar issue in the past with left turns causing my car to stumble.

Where's the fuel pump in in your car ? If its not in the tank then this isn't a probable solution for you.
Click to expand...
The pump is inside the tank, thanks for the message I think I'll just Change the pump itself if I'm dropping the tank anyways. Thank you
 

Gen4Stang

Active User
Jul 30, 2016
16
0
1
MICHIGAN
Aug 28, 2016
#13
  • Aug 28, 2016
  • #13
90sickfox said:
I ran an edelbrock 1406 and edelbrock intake for 5 years daily driven with no issues.

Sounds like the baffle may have come loose in your gas tank. I had a similar issue in the past with left turns causing my car to stumble.

Where's the fuel pump in in your car ? If its not in the tank then this isn't a probable solution for you.
Click to expand...
sorry but would a fuel cell be a solution if it's a baffle issue?
 

90sickfox

Wasn't a pretty sight...and I've got big hands
SN Certified Technician
Mar 2, 2015
6,945
5,816
213
Aug 28, 2016
#14
  • Aug 28, 2016
  • #14
Gen4Stang said:
sorry but would a fuel cell be a solution if it's a baffle issue?
Click to expand...

It could be...if you're into that type of thing. Lol
 

Gen4Stang

Active User
Jul 30, 2016
16
0
1
MICHIGAN
Aug 28, 2016
#15
  • Aug 28, 2016
  • #15
90sickfox said:
It could be...if you're into that type of thing. Lol
Click to expand...
haha!
Just thinking it'd be a cheaper alternative and avoiding a headache of messing with baffles on the tank..
 

90sickfox

Wasn't a pretty sight...and I've got big hands
SN Certified Technician
Mar 2, 2015
6,945
5,816
213
Aug 28, 2016
#16
  • Aug 28, 2016
  • #16
Gen4Stang said:
haha!
Just thinking it'd be a cheaper alternative and avoiding a headache of messing with baffles on the tank..
Click to expand...
It would probably be cheaper to get a new tank. Sad thing is....the only way you'll know is to drop the tank and look.
 

Gen4Stang

Active User
Jul 30, 2016
16
0
1
MICHIGAN
Aug 28, 2016
#17
  • Aug 28, 2016
  • #17
Thanks for the insight brotien shake... appreciate it..
 
You must log in or register to reply here.

Similar threads

Electrical problem plug in the drivers kick panel
  • Mindseye007
  • Sunday at 2:30 AM
  • Fox 5.0 Mustang Tech
Replies
3
Views
97
Fox 5.0 Mustang Tech Sunday at 5:47 PM
Mindseye007
F
Engine 1988 Foxbody idle issues
  • fernandosgarage55
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
26
Views
648
Fox 5.0 Mustang Tech Apr 30, 2026
AeroCoupe
S
FUEL PUMP ALWAYS ON
  • Scwhitten
  • Jun 6, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • 2
Replies
27
Views
535
1996 - 2004 SN95 Mustang -General/Talk- Jul 4, 2026
manicmechanic007
R
Efi to car pcv HELP !
  • rgrendell
  • Jul 29, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
358
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 2, 2026
Noobz347
E
2007 GT Stalls when lights or a/c turned on
  • ejscarfo
  • Jun 22, 2026
  • 2005 - 2009 Specific Tech
Replies
2
Views
153
2005 - 2009 Specific Tech Jun 29, 2026
ejscarfo
E
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?