Hey, i'm Max.. I'm in New Jersey and i'm new to the Forum.
here's a clip of my ride: http://uk.youtube.com/watch?v=aYqQjWWifLA (wait until 1:10 for the idle to kick down)....
here are the mods:
306 with 10 to 1 pistons
GT40 Heads
Edlebrock Performer RPM Intake
BRAND NEW steeda t5 with less than 100 miles on it
373's
Weld Draglights
Flowmasters
*Comp Cam Extreme
Traction bars
Short Throw Shifter also brand new
Holly Street Avenger Carb 670cfm -
Griffen Aluminum water pump -
Griffen aluminum radiator -
BBK Long tubes -
BBK H- pipe -
Master Cylinder -
Power Booster -
Spec aluminum flywheel -
King Cobra clutch - BRAND NEW
Aluminum driveshaft -
Cervinies Cobra R hood -
New Battery -
MSD Ignition Box -
Exhaust setup: BBK Longtubes, BBK H-pipe, flowmasters and flowmaster tail pipes (3 inch!!!)
anything else you guys want to know, let me know... the reason why it's not a full shot is because it's currently sanded down and half-primed (waiting to bring it in for paint)... just wanted to give everyone a taste of it.
here's a clip of my ride: http://uk.youtube.com/watch?v=aYqQjWWifLA (wait until 1:10 for the idle to kick down)....
here are the mods:
306 with 10 to 1 pistons
GT40 Heads
Edlebrock Performer RPM Intake
BRAND NEW steeda t5 with less than 100 miles on it
373's
Weld Draglights
Flowmasters
*Comp Cam Extreme
Traction bars
Short Throw Shifter also brand new
Holly Street Avenger Carb 670cfm -
Griffen Aluminum water pump -
Griffen aluminum radiator -
BBK Long tubes -
BBK H- pipe -
Master Cylinder -
Power Booster -
Spec aluminum flywheel -
King Cobra clutch - BRAND NEW
Aluminum driveshaft -
Cervinies Cobra R hood -
New Battery -
MSD Ignition Box -
Exhaust setup: BBK Longtubes, BBK H-pipe, flowmasters and flowmaster tail pipes (3 inch!!!)
anything else you guys want to know, let me know... the reason why it's not a full shot is because it's currently sanded down and half-primed (waiting to bring it in for paint)... just wanted to give everyone a taste of it.