Hey Randy..

[tomustang]

Is there a difference between the 96-98 Cobra UCA's/axle bushings and the FRPP ones?

I was checking out the bushings from my cobra when I did a rear swap and noticed the (axle end) FRPP, cobra, and my 98 bushings felt all the same so I can't really tell the difference from that. Only noticeable difference was each inside bolt rods had their own style teeth from each axle bushing

FRPP left, Cobra Axle on the right

 

[Stang|ess]

Isnt Randy over at MD?

bump for you.

 

[RandyStinchcomb]

Isnt Randy over at MD?

bump for you.

Hey Randy???? wadda' ya' think, this is MD

never sure what Frpp packages and there have been some mix-ups wth them. I can tell you there are 2 different part #'s for the rear upper bushings, 2001 up and 2000 back. I can't make-out any #'s form you pics, do you see any #'s on the bushings?

 

[tomustang]

Hey Randy???? wadda' ya' think, this is MD

never sure what Frpp packages and there have been some mix-ups wth them. I can tell you there are 2 different part #'s for the rear upper bushings, 2001 up and 2000 back. I can't make-out any #'s form you pics, do you see any #'s on the bushings?

Well the bushings on the cobra are wore out on the sides so the only thing that is readable is SILENT (for SILENTTBLOC) left side bushing has a 1 on it, the right has a 12. Doubt the 1 and 12 mean anything, could just be the what casting mold it was in, but the FRPP one is 35. And a very faded 'lll'

There's nothing left on the gt bushings though