• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Hissing from clutch?

  • Thread starter Thread starter shlby123
  • Start date Start date Jun 16, 2007
S

shlby123

Founding Member
Apr 19, 2002
579
0
0
Dallas
Jun 16, 2007
#1
  • Jun 16, 2007
  • #1
My '87 5.0 is having an issue with the clutch I believe? Whenever I depress the clutch to change any gear I can hear a hissing noise from under the car. ONLY does it when I press the clutch in whether Im moving or not. Any ideas of what I should check?
 

BlownFiveLiter

have car, will race....wait, it doesn't run
15 Year Member
Nov 29, 1999
3,133
18
108
Chicagoland
Jun 16, 2007
#2
  • Jun 16, 2007
  • #2
Is it a constant noise? That'd be a good indicator of a bad TOB or bearing retainer. Summitracing.com has a FRPP one for $39.88 if that's the problem. They have several TOB's listed for various prices as well.
 
S

shlby123

Founding Member
Apr 19, 2002
579
0
0
Dallas
Jun 16, 2007
#3
  • Jun 16, 2007
  • #3
Constant as in how? It makes the noise every time i push the clutch down but only when I push the clutch down
 

BlownFiveLiter

have car, will race....wait, it doesn't run
15 Year Member
Nov 29, 1999
3,133
18
108
Chicagoland
Jun 16, 2007
#4
  • Jun 16, 2007
  • #4
Sorry. By constant I mean, it makes the noise as long as you depress and hold the clutch.
 
S

shlby123

Founding Member
Apr 19, 2002
579
0
0
Dallas
Jun 16, 2007
#5
  • Jun 16, 2007
  • #5
I havent tried holding it down for real long but Im gonna say yes.
 

MustangLX-5.0

Founding Member
Dec 2, 2000
856
7
38
Lehigh Acres Fla.
Jun 17, 2007
#6
  • Jun 17, 2007
  • #6
That's odd,i've never heard of it "hissing" while the clutch was depressed.It don't seem like it would be the throw out bearing making this noise.The throw out bearing only would make noise if it were spinning.When you press the clutch in,the load of the engine is being removed and therefore has no grasp on the clutch/TOB so therefore it would slow down and eventually stop after about 3 - 5 seconds.So if there is still noise after this time,then it is definately not the TOB.Perhaps something on the flywheel end.

You don't have a Hydraulic clutch installed,do you?
 

MustangLX-5.0

Founding Member
Dec 2, 2000
856
7
38
Lehigh Acres Fla.
Jun 17, 2007
#7
  • Jun 17, 2007
  • #7
Or maybe you have HISSIN50 hidin out under your ride.......
 
S

shlby123

Founding Member
Apr 19, 2002
579
0
0
Dallas
Jun 17, 2007
#8
  • Jun 17, 2007
  • #8
No I dont believe I have a hydraulic clutch. Where exactly is the throwout bearing though in relation to the clutch. I have to replace the clutch tomorrow anyway. Is the TOB tough to find or fix or is it pretty easy?
 

BlownFiveLiter

have car, will race....wait, it doesn't run
15 Year Member
Nov 29, 1999
3,133
18
108
Chicagoland
Jun 17, 2007
#9
  • Jun 17, 2007
  • #9
The TOB is on the clutch fork and it's what presses agaist the fingers on the pressure plate. It's a normal wear item with a clutch, so you'll probably see a new one with your clutch anyway. It'll probably be the solution to your problem right there.
 

Maryland Stang

Active Member
Aug 21, 2002
1,656
30
39
Greenville, NC
Jun 17, 2007
#10
  • Jun 17, 2007
  • #10
You sure it's not a Cobra?
 
V

vaderjm

New Member
Nov 8, 2007
1
0
0
Nov 8, 2007
#11
  • Nov 8, 2007
  • #11
To Maryland Stang (Hissing Clutch)

When I depress the clutch and let it out I get a hissing sound. You said something interesting. "Are you sure it isn't a cobra?"

i have a 2007 gt-500 Cobra I bought last weekend. I noticed the hissing this past couple of days. any ideas?

thank you
 
You must log in or register to reply here.

Similar threads

M
85 Capri 5.0 transmission rattle
  • Mamaclean
  • May 2, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
163
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 17, 2026
Mamaclean
M
S
Drivetrain Downshifting from 3rd to 2nd issue
  • Scott_S
  • Apr 23, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
790
Fox 5.0 Mustang Tech Jun 14, 2026
Mindseye007
A
1987 5.0 speed density Foxbody crank no start
  • Alan2204
  • May 23, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
316
Fox 5.0 Mustang Tech May 30, 2026
Mcmahst
C
Electrical HELP! 1989 5.0 Stick, Voltage Bleed onto Ignition Trigger wire
  • ChickenDeluxe
  • May 14, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
252
Fox 5.0 Mustang Tech May 24, 2026
ChickenDeluxe
C
R
Drivetrain Clutch
  • Robman8028
  • Jun 29, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
272
Fox 5.0 Mustang Tech Jul 2, 2025
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?