Hitech Stage II's Questions Please help!!

evil281

New Member

Jan 6, 2008

276

0

0

Arizona

Feb 15, 2009

#1

• Feb 15, 2009

• #1

Ive been looking into getting the hitech stages II's for my 99 GT but i dont know if it would work with my current set up, i have stock gears and stock headers, everthing else is in my sig, would this be a poor application for cams at all?, i just want to be close to 280-300 rwhp, my car dynoed at 250rwhp and 288 rwtrq at about 100 degrees temp, iwant to keep my stock gears cause its my DD

any insight and opinions would be much appreciated!

i dont really plan on blowin this car just keep it a DD and get 03/04 cobra

 

02nightmaregt

To hell with your Mustang, I want to see your HOG!

Jul 1, 2007

513

4

19

Southern Indiana

Feb 15, 2009

#2

• Feb 15, 2009

• #2

From what i've heared/seen most guys can get 300rwhp with those cams. I think you have a great application for those cams. LT's would be even better. Are you worried about mpg's with gears? My 3.73's are great. I routinely get either right at or a little over 200 miles per tank with mostly city driving.

 

evil281

New Member

Jan 6, 2008

276

0

0

Arizona

Feb 15, 2009

#3

• Feb 15, 2009

• #3

its kinda a mixture of i dont wana pay 500 bucks in labor to install and i dont want the higher rpm while driving freeway which i do oftern im not 100percent against them or anything, just have to get the mindset to spend that much on em, i lean more toward cams and LTs tho

 

02nightmaregt

To hell with your Mustang, I want to see your HOG!

Jul 1, 2007

513

4

19

Southern Indiana

Feb 15, 2009

#4

• Feb 15, 2009

• #4

I got ya. If i were you i would wait until i had to rebuild the rear and do a full build with gears. Other than that go for the cams/LT's

 

evil281

New Member

Jan 6, 2008

276

0

0

Arizona

Feb 15, 2009

#5

• Feb 15, 2009

• #5

i just want to make sure these arent to aggressive if i dont have LTs or gears for awile

 

evil281

New Member

Jan 6, 2008

276

0

0

Arizona

Feb 16, 2009

#6

• Feb 16, 2009

• #6

seriously no one knows anything about cams and mustangs??

 

M

md99gt

New Member

Jan 15, 2009

24

0

1

Feb 16, 2009

#7

• Feb 16, 2009

• #7

I too would like to know, I am in the same boat. I would like to get the hightech stage II's but do not have headers....

 

eliteJAE

Member

May 29, 2007

0

1

16

Stanford University

Feb 16, 2009

#8

• Feb 16, 2009

• #8

PM this guy 98COBRA281 he just put on some hitech II's on his p&p npi build and got 310rwhp with LT's

 

evil281

New Member

Jan 6, 2008

276

0

0

Arizona

Feb 16, 2009

#9

• Feb 16, 2009

• #9

but wha i wana know is if i dont have LTs and gears is it not a good idea to get this cam??

 

98COBRA281

10 Year Member

Nov 24, 2007

1,348

30

59

Port St. Lucie, Florida

Feb 16, 2009

#10

• Feb 16, 2009

• #10

eliteJAE said:

PM this guy 98COBRA281 he just put on some hitech II's on his p&p npi build and got 310rwhp with LT's

Click to expand...

i dont have hitech's, i have powerhead regrinds 540/540lift, 225/230 duration @ .50, 112lsa/

i really wish i would have went with them now, i made 310rwhp with a tad over 10:1 comp, pretty mild cams, and stock size npi valves.

just imagine if i went with 11.5:1 comp, bigger cams, and +1mm over sized valves, talk about 330-340rwhp

 

02nightmaregt

To hell with your Mustang, I want to see your HOG!

Jul 1, 2007

513

4

19

Southern Indiana

Feb 16, 2009

#11

• Feb 16, 2009

• #11

98COBRA281 said:

i dont have hitech's, i have powerhead regrinds 540/540lift, 225/230 duration @ .50, 112lsa/

i really wish i would have went with them now, i made 310rwhp with a tad over 10:1 comp, pretty mild cams, and stock size npi valves.

just imagine if i went with 11.5:1 comp, bigger cams, and +1mm over sized valves, talk about 330-340rwhp

Click to expand...

And a nice big FAT ole' shot of happy gas

 

98COBRA281

10 Year Member

Nov 24, 2007

1,348

30

59

Port St. Lucie, Florida

Feb 16, 2009

#12

• Feb 16, 2009

• #12

02nightmaregt said:

And a nice big FAT ole' shot of happy gas

Click to expand...

dontworryaboutthatihaveazexwetkitinmyroomrightnow andiwillbesprayinga100shotsoonimjustkeepingitonthedownlow

 

02nightmaregt

To hell with your Mustang, I want to see your HOG!

Jul 1, 2007

513

4

19

Southern Indiana

Feb 16, 2009

#13

• Feb 16, 2009

• #13

 

evil281

New Member

Jan 6, 2008

276

0

0

Arizona

Feb 16, 2009

#14

• Feb 16, 2009

• #14

lol so the secret happy gas is awesome but do u guys think this cam is a good choice for my current mods??

 

98COBRA281

10 Year Member

Nov 24, 2007

1,348

30

59

Port St. Lucie, Florida

Feb 16, 2009

#15

• Feb 16, 2009

• #15

evil281 said:

lol so the secret happy gas is awesome but do u guys think this cam is a good choice for my current mods??

Click to expand...

it would be fine with you mods, but you realy need gears, they dont not hurt the milage that bad, you might lose 1-2mpg......

 

evil281

New Member

Jan 6, 2008

276

0

0

Arizona

Feb 16, 2009

#16

• Feb 16, 2009

• #16

like i said above its not really just that, its like a combo off the $500 dollars in just labor and then on top of that ill lose mpg's and have high rpm on freeway, all that for near $1000 bucks aftert parts and labor, not really worth it to me but idk

 

eliteJAE

Member

May 29, 2007

0

1

16

Stanford University

Feb 16, 2009

#17

• Feb 16, 2009

• #17

lol my bad, then I wonder who had the hitechs.....hmmmmm...

 

F

ford00stangt

New Member

Jul 14, 2007

5

0

2

franklinville nj

Feb 17, 2009

#18

• Feb 17, 2009

• #18

i have Hitech stageII's..but i got Lt,gears,

 

evil281

New Member

Jan 6, 2008

276

0

0

Arizona

Feb 17, 2009

#19

• Feb 17, 2009

• #19

what kind of numbers are u pushin with em?