Holes behind GT mustang emblems??????

cb18201

New Member

Oct 25, 2003

1,140

0

0

CT

Dec 10, 2003

#1

• Dec 10, 2003

• #1

i have heard there are big holes behind the GT mustang emblems, how big are these holes. (in inches) i am planning on getting these rectangle 302 emblems:

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33697&item=2448022329

but i want to make sure they will completly cover the hole behind the gt mustang emblem, if anyone knows please help, or if you have a picture of the hole on your car it would help too, thanks

 

ProKiller

Founding Member

Apr 26, 2002

3,064

15

78

PA

Dec 10, 2003

#2

• Dec 10, 2003

• #2

i know the middle hole is like a 1/2 in. but i can't remember if there is one on each side of that one or just one. Either way, they(it) is only like a 1/4 in. You should be good.

 

rustang94

Member

Dec 2, 2003

281

0

16

Milwaukee WI.

Dec 10, 2003

#3

• Dec 10, 2003

• #3

There is 1 hole behind each gt emblem about 1/4 inch maybe just a hair bigger. I took my gt emblems off and replaced them with the running ponys. and they covered the holes fine.

 

cb18201

New Member

Oct 25, 2003

1,140

0

0

CT

Dec 10, 2003

#4

• Dec 10, 2003

• #4

rustang94 said:

There is 1 hole behind each gt emblem about 1/4 inch maybe just a hair bigger. I took my gt emblems off and replaced them with the running ponys. and they covered the holes fine.

Click to expand...

ok thats good then, the emblems im getting are about an inch tall. thanks guys

 

R

rockin_rick

Member

Oct 9, 2003

968

1

17

Dec 10, 2003

#5

• Dec 10, 2003

• #5

I broke out the camera and took you a pic, it should answer all of your questions! The 2 posts are circled in red.

Rick

 

Attachments

• fender emblem mounting posts size.webp

  16.2 KB · Views: 300

cb18201

New Member

Oct 25, 2003

1,140

0

0

CT

Dec 10, 2003

#6

• Dec 10, 2003

• #6

thanks man, do you think i could get away with putting on emblems that are only an inch tall?, it looks like exactly an inch i would have to cover, but i think it would be close

 

R

rockin_rick

Member

Oct 9, 2003

968

1

17

Dec 10, 2003

#7

• Dec 10, 2003

• #7

From the outer edge of the big post to the outer edge of the small one, it's 1 1/32". So the actual holes in the fender must be bigger. So figure the span is at least 1 1/8". And then I'd want some extra to 'seal' up the hole from water getting in (and starting rusting). If you want a 1/8" seal of adhesive around the outsides of the holes, your talking 1 3/8", at least. What emblems are you interested in?

Rick

 

cb18201

New Member

Oct 25, 2003

1,140

0

0

CT

Dec 10, 2003

#8

• Dec 10, 2003

• #8

rockin_rick said:

From the outer edge of the big post to the outer edge of the small one, it's 1 1/32". So the actual holes in the fender must be bigger. So figure the span is at least 1 1/8". And then I'd want some extra to 'seal' up the hole from water getting in (and starting rusting). If you want a 1/8" seal of adhesive around the outsides of the holes, your talking 1 3/8", at least. What emblems are you interested in?

Rick

Click to expand...

these emblems: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33697&item=2448022329

 

88GtHoe

Founding Member

Nov 14, 2001

353

0

0

St. Louis MO

Dec 11, 2003

#9

• Dec 11, 2003

• #9

Are there holes behind the snakes on my cobra?