• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

holy hotness batman!

  • Thread starter Thread starter dannydoo
  • Start date Start date Sep 26, 2004
D

dannydoo

Member
Sep 10, 2004
195
0
17
Sep 26, 2004
#1
  • Sep 26, 2004
  • #1
recently my stock cats and pipe were put back on cause my offroad h pipe was shot...and wanted the quieter sound for a little while..
i guess cause i have shorty headers maybe things got hot!

after i shut my car off i can hear poping,crackling snapping tinging and pinging clicking...from my exhaust cause its so hot!!!im thinking maybe the cats are clogged?or the headers are just too much for the stock setup?

i have a atkins digital heat guage and i took the temp of the headers and they arent hot a t all...any help would be hot
95 aode shft.kit,2600 stall,flowmasters,shorty headers mac,ford 4 10,undrdrive pullies,160 therm,remote fan,k n cold air.................
 

GTJake

Founding Member
Oct 28, 2002
3,049
0
56
Ann Arbor, MI
Sep 26, 2004
#2
  • Sep 26, 2004
  • #2
My parent Explorer does that when you shut off the car and it's cold outside. I don't think anythings wrong.

Jake
 

Black95GTS

Active Member
Jan 8, 2004
1,644
3
38
Marlborough, MA
Sep 26, 2004
#3
  • Sep 26, 2004
  • #3
my stock exhaust setup did the same thing. no bigs.
 

mo_dingo

20+ Year Stangneter
Aug 26, 2003
3,031
2
58
Tucson, AZ
Sep 26, 2004
#4
  • Sep 26, 2004
  • #4
dannydoo said:
after i shut my car off i can hear poping,crackling snapping tinging and pinging clicking...from my exhaust cause its so hot!!!im thinking maybe the cats are clogged?or the headers are just too much for the stock setup?
Click to expand...

Sounds like your oil is bubbling in the pan. Many cars I have owned have done this.

Have you noticed your engine temperature lately? Higher or lower or same?
Scott
 
D

dannydoo

Member
Sep 10, 2004
195
0
17
Sep 26, 2004
#5
  • Sep 26, 2004
  • #5
my fans on all the time and i got a 160 stat..my temp never goes over r
and thats when its hot w a/c on...
i took the initiative to test the temp so i know what that cheesy guage is really reading
when its on the middle of n its 160 o is 170 r is 180 that i know!!
it makes sense cause m=180a-190 l=200

i hope my oil isnt boiling or bubbling!!my oil guage is always dead smack in the middle allllll the time..im gonna post to see if thats normal..i gotta check my oil pressure but dont have right tools...

im saying...it didnt do that w/the catless pipe.and the heat from my engine compartment is atrocious.
 

Pushrod

Founding Member
Jun 8, 2002
173
0
0
KS
Sep 27, 2004
#6
  • Sep 27, 2004
  • #6
its just the stainless steel pipes contracting when they cool after you shut it off
 
D

dannydoo

Member
Sep 10, 2004
195
0
17
Sep 27, 2004
#7
  • Sep 27, 2004
  • #7
so this is normal?i never heard any other car do that unless they had heat issues...
im talkin about some loud crackling,,you can definitly hear the hollow sound of tinging inside the pipes meaning its them....
i guess im worried if the stock cats can keep up w/headers??and if the cats might be clogged??im sure when the factorys fabricated these pipes they made sure it wasnt gonna be heating to the point of major flex,under normal operation.....meaning i think somethings fishy and there is way too much heat...
what is the normal temp of a stock cat@warm temp??cause im gonna climb under there and find the hell out exactly how hot it is!!!tired of guessin,
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Sep 27, 2004
#8
  • Sep 27, 2004
  • #8
IME, it is normal for the exhaust to 'tink' after the car is shut off (metal contraction).

an old school exhaust restriction test is to rev the motor and hold it, at say 3K rpm. have a vac gauge attached. if the vac drops within a reasonable amount of time (test for 30-60 seconds or whatever you want), that suggests a restriction.

good luck.
 
D

dannydoo

Member
Sep 10, 2004
195
0
17
Sep 27, 2004
#9
  • Sep 27, 2004
  • #9
im gonna try that..i just bought a vacuum guage..but never tested for vacuum??dont know where to connect it to?
my recent toys ,,ford scanner,timing light,vaccuum guage,fp guage..
for 100$ it takes alot of guesswork out and makes tinkering more fun than frustrating.
 

NIN

New Member
Dec 4, 2002
452
0
0
moorhead MN
Sep 27, 2004
#10
  • Sep 27, 2004
  • #10
Well, I hope it is normal because my car does that all the time. It's called expanding and contracting.
 

ProKiller

Founding Member
Apr 26, 2002
3,064
15
78
PA
Sep 27, 2004
#11
  • Sep 27, 2004
  • #11
its normal. just the cats cooling off.
 
1

1hot5.0

Founding Member
Sep 6, 2002
1,615
0
0
Surprise, Arizona
Sep 27, 2004
#12
  • Sep 27, 2004
  • #12
My Stainless Bassani Catted x-pipe does what you are describing. My stock h-pipe did it too. No worries.

:OT: but do you have any 1/4 mile times for your car with that stall in? I have a 2,600 stall waiting to go in and was wanting to get a general idea of what kinda times I could expect.
 
D

dannydoo

Member
Sep 10, 2004
195
0
17
Sep 27, 2004
#13
  • Sep 27, 2004
  • #13
the combo of the 4.10 shift kit and 2600 stall turned the car from pretty decent,,to holy cow!!!its like going from a moped to motorcylcle..i love it..it makes the car alot of fun.i can chirp all the gears exept od,and the stall kinda makes the power band feel more serious..if im cruisin at 35-40 and punch it ,it will downshift and powerband goes nuts and kicks my rear end out,a stall is really for when your cam makes its power at a certian rpm then the tranny doesnt fully engage untill that rpm...which will get you aggrivated on the daily driving sometimes..not to mention you mpg going to hell.
as far as your 1/4 mile times improving w /a stall.........im guessing it might give you a couple of tenths if you time it right...do you have a stock cam?i wouldnt recommend anyone putting over 2600 in a daily driver,or 410 if you do alot of hwy driving..both sacrifice mpg but the benifits will make you grin
 
You must log in or register to reply here.

Similar threads

F
Running Rich (codes included)
  • FiveOhGabe
  • Aug 7, 2023
  • 1994 - 1995 Specific Tech
Replies
4
Views
880
1994 - 1995 Specific Tech Aug 9, 2023
AeroCoupe
SN95 Desktop 363 Engine Combination - Looking for input
  • WhiteCobra95
  • Sep 8, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 6, 2025
Habu135
C
Anybody recognize this car?
  • ctandc
  • Jun 14, 2023
  • The Welcome Wagon
Replies
10
Views
3K
The Welcome Wagon Apr 27, 2025
Noobz347
F
1993 Cobra flooding
  • FireFoxCobra_SVT93
  • May 20, 2022
  • Fox 5.0 Mustang Tech
  • 2
Replies
20
Views
5K
Fox 5.0 Mustang Tech Mar 11, 2023
nickyb
A
1991 5.0 with HCI - started car, running for a few minutes, started pushing coolant into the overflow tank and then puking out from there. I'm lost
  • AmericanMuscle4.6GT
  • Oct 16, 2022
  • Fox 5.0 Mustang Tech
Replies
6
Views
4K
Fox 5.0 Mustang Tech Nov 30, 2022
CAMTWO1070
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?