• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Hood Latch Cable Replacement

  • Thread starter Thread starter epicadventure
  • Start date Start date Oct 5, 2005
E

epicadventure

New Member
Oct 5, 2005
2
0
0
South central KY
Oct 5, 2005
#1
  • Oct 5, 2005
  • #1
I just bought a 93 GT and it has a broken hood latch cable. How do I replace it and where can I get one?
 

Autobodypro_1

New Member
Sep 30, 2005
76
0
0
Florida
Oct 7, 2005
#2
  • Oct 7, 2005
  • #2
Hood latch cable

Is your hood completely latched? if it's not, you are in luck, if it is you should check if the handle is broken off under your dash. If the cable is intact but the handle is broken off you can grab the end of the cable itself with a pair of vice grips or pliers and release it. If the cable is snapped in two, you will have to somehow get under the car, (properly supported) and try to go between the a/c condenser and grill and somehow snag the release on the latch with a coat hanger. Or you can try to grab the cable where it passes behind the left headlight and try to release it. I looked on my '91 and it looks like a real magilla. Sometimes you can unbolt the latch, but it looks real hard on a 'stang. Once you get it open, a replacement is as far as your dealer. I usually use masking tape and tape the end of the new cable to the end of the old cable where the handle is and guide it through the firewall and engine compartment to the latch...the new cable will follow the old one so there will be no questions on routing and you shouldn't have to remove the inner fender liner. One other thing, some cars have an excessive gap between the hood and front bumper fascia and you may be able to sneak a 1/4" ratchet extension with a short 8mm socket and unbolt the latch using the 2 access holes in the fascia. Also check for a jam-shut due to collision damage, have one guy work the cable and another try to un-jam the hood....Good Luck
 
E

epicadventure

New Member
Oct 5, 2005
2
0
0
South central KY
Oct 7, 2005
#3
  • Oct 7, 2005
  • #3
Thanks for the help. There is about 2 feet of cable still connected to the latch that hangs down in the front. The cable broke at the battery and there is no cable attached to the handle (went to open hood and ended up with handle in hand). I'd like to replace the cable if possible.
 

Autobodypro_1

New Member
Sep 30, 2005
76
0
0
Florida
Oct 7, 2005
#4
  • Oct 7, 2005
  • #4
Glad to be of help.
 
You must log in or register to reply here.

Similar threads

Paint and Body Door Latch Issue
  • KRUISR
  • Oct 9, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
271
Fox 5.0 Mustang Tech Oct 15, 2026
General karthief
Drivetrain Broken clutch cable- what it looks like
  • JulianR
  • Aug 6, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
876
Fox 5.0 Mustang Tech Aug 10, 2026
gkomo
S
Hood latch connector
  • skkrtis
  • Aug 3, 2025
  • 2015 - 2023 (S550) Mustang -General/Talk
Replies
0
Views
170
2015 - 2023 (S550) Mustang -General/Talk Aug 3, 2025
skkrtis
S
Drivetrain Hood latch/cable issues
  • AnthonyA1234
  • Nov 1, 2024
  • Fox 5.0 Mustang Tech
Replies
3
Views
938
Fox 5.0 Mustang Tech Nov 20, 2024
AnthonyA1234
C
Drivetrain TV cable replacement--aftermarket or search other models?
  • chazmanaz
  • Dec 21, 2025
  • Fox 5.0 Mustang Tech
Replies
3
Views
398
Fox 5.0 Mustang Tech Dec 22, 2025
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?