• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Horrible noise...bad AC clutch?

  • Thread starter Thread starter Acheron315
  • Start date Start date May 13, 2004

Acheron315

New Member
Oct 23, 2003
235
0
0
Charleston, SC
May 13, 2004
#1
  • May 13, 2004
  • #1
My car sounds normal and runs fine, but when the AC is turned on a horrible screeching noise emits from the engine bay. It is so loud that I am having trouble narrowing down the source. It sounds like metal on metal, and is EXTERMELY loud! It also causes the engine to stumble at idle. Does this sounds like a bad AC clutch? I have narrowed down almost everything else, and the noise only happens with AC on. How much does a new clutch unit cost?

Thanks!
 

Go HoTO!

New Member
Apr 11, 2004
602
0
0
Mountaintop, PA
May 13, 2004
#2
  • May 13, 2004
  • #2
This happend to my Subrban twice. Your AC is most likely totally toast if it is how you describe. My AC Clutch went bad due to a blockage in the system that resulted in compressor failure. Hopefully, you will be more lucky.
 

Acheron315

New Member
Oct 23, 2003
235
0
0
Charleston, SC
May 13, 2004
#3
  • May 13, 2004
  • #3
Yeesh that sounds time consuming/ expensive to fix. I was hoping it would just be the clutch
 

streetstang03

unModerator
Dec 27, 2003
0
1
0
the dark side of the moon/home of the 1999, 2003,
May 13, 2004
#4
  • May 13, 2004
  • #4
just got mine done yesterday cost me $987 to get a whole new compressor. my a/c clutch was burning up and trashed the shaft of the compressor. the clutch itself was hanging off by only 1 bolt!!! if ur clutch pulley is a red color, get ready...ur screwed. say goodbye to $1000!!!! (if u get all new parts)
 

Acheron315

New Member
Oct 23, 2003
235
0
0
Charleston, SC
May 13, 2004
#5
  • May 13, 2004
  • #5
streetstang03 said:
if ur clutch pulley is a red color, get ready
Click to expand...

What exactly is red on the pulley, and how is this an indicator of ac clutch life?
 

streetstang03

unModerator
Dec 27, 2003
0
1
0
the dark side of the moon/home of the 1999, 2003,
May 13, 2004
#6
  • May 13, 2004
  • #6
Acheron315 said:
What exactly is red on the pulley, and how is this an indicator of ac clutch life?
Click to expand...

the whole pully and clutch will look like its a rusted color. it turns that color due to the heat from it burning up. my pulley and clutch actually started to smoke the other day while i was driving to my g/f's house. i smelt this burning rubber smell and when i got to her house, smoke was coming out from under the hood. when i popped the hood, the clutch was smoking bad. too it to the shop the next day, which was yesterday.
 

COramprat

...I can take it. I think.
20+ Year Stangneter
Mar 2, 2003
8,474
1,463
223
Sea of Tranquility
May 14, 2004
#7
  • May 14, 2004
  • #7
Mine is making a rattling noise when the AC is off and the pulley turns hurky jerky. When I turn the AC on it goes away. I believe mine is on it's last leg also.
 

streetstang03

unModerator
Dec 27, 2003
0
1
0
the dark side of the moon/home of the 1999, 2003,
May 14, 2004
#8
  • May 14, 2004
  • #8
coramprat said:
Mine is making a rattling noise when the AC is off and the pulley turns hurky jerky. When I turn the AC on it goes away. I believe mine is on it's last leg also.
Click to expand...

get ready to shell out some $$$$$$
 

COramprat

...I can take it. I think.
20+ Year Stangneter
Mar 2, 2003
8,474
1,463
223
Sea of Tranquility
May 14, 2004
#9
  • May 14, 2004
  • #9
streetstang03 said:
get ready to shell out some $$$$$$
Click to expand...
I'll just find one in a junkyard and do it myself.
 

Acheron315

New Member
Oct 23, 2003
235
0
0
Charleston, SC
May 14, 2004
#10
  • May 14, 2004
  • #10
coramprat said:
I'll just find one in a junkyard and do it myself.
Click to expand...

I was just thinking that...looking at stangparts.com right now Only $90.00 used! http://www.stangparts.com/products/partpic.cfm?TypeID=5&ID=2636&Page=1&ShowSpecials=FALSE

I would much rather do that then trust the dealer with my car out of my sight.
 

streetstang03

unModerator
Dec 27, 2003
0
1
0
the dark side of the moon/home of the 1999, 2003,
May 14, 2004
#11
  • May 14, 2004
  • #11
i was considering using a rebuilt part, but the compressor will leak easier and wont hold up very long. everyone i talked to said it was better to use new Motorcraft parts since they will last longer and wont crap out anytime soon. plus, this way i got a warranty on all the parts and labor ( i didnt take it to a dealer either. took it to a shop some local stangers recommended ). the if ur replacing the compressor, ur going to have to have freon put back into the system as well. mine was in really really bad shape, so urs might not be as bad as mine was. so, hopefully it will be cheaper for u!!! LOL
 
You must log in or register to reply here.

Similar threads

B
90Gt squeal/chirp when hot
  • Bvoss59
  • Jun 12, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
682
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 14, 2025
General karthief
Resolved Fixing a GT40P Valvetrain nightmare
  • foxbodyclark
  • May 21, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
1K
Fox 5.0 Mustang Tech May 24, 2025
limp
D
Foxbody Misfire 5.0 Swap
  • DPORTER0729
  • May 2, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
621
Fox 5.0 Mustang Tech Jul 13, 2025
90sickfox
M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
512
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
Engine Valve and or rocker noise .....new to this but dont mind getting my hands dirty.
  • mustang matt 1993
  • Jun 29, 2024
  • Fox 5.0 Mustang Tech
Replies
16
Views
2K
Fox 5.0 Mustang Tech Jul 1, 2024
rednotch
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?