For my g/f's 90 GT.
Holley systemax II kit
Lunati roller camshaft, P/N 51027LUN
Holley upper and lower shiny intake manifold, P/N 300-72S
(Upper intake manifold only) P/N 300-74S
(Lower intake manifold only) P/N 300-75S
Holley double roller timing chain and gears
Fully assembled Holley 17° valve aluminum cylinder heads, P/N 300-575
Hardened push rods, P/N 301-32
ARP® cylinder head bolts, P/N 301-31
Camshaft Specifications
Advertised Duration (degrees) 276 (Intake)280 (Exhaust)
Duration @ 0.050" (degrees) 221 (Intake)223 (Exhaust)
Valve Lift (inches) 0.509 (Intake)0.509 (Exhaust)
Lobe Separation Angle (degrees) 112 (Exhaust)
Opens (degrees) 3.5 BTDC (Intake) 48.5 BBDC (Exhaust)
Closes (degrees) 37.5 ABDC (Intake) -5.5 ATDC (Exhaust)
Comp cams 1.6 roller rockers
BBK 70mm TB and EGR plate
Granatelli MAF
24 or 30 pound injectors
Sound like a good setup? She's thinking of taking out a loan, and getting this plus a tremec 3550. Would 24 or 30# injectors be better?
Holley systemax II kit
Lunati roller camshaft, P/N 51027LUN
Holley upper and lower shiny intake manifold, P/N 300-72S
(Upper intake manifold only) P/N 300-74S
(Lower intake manifold only) P/N 300-75S
Holley double roller timing chain and gears
Fully assembled Holley 17° valve aluminum cylinder heads, P/N 300-575
Hardened push rods, P/N 301-32
ARP® cylinder head bolts, P/N 301-31
Camshaft Specifications
Advertised Duration (degrees) 276 (Intake)280 (Exhaust)
Duration @ 0.050" (degrees) 221 (Intake)223 (Exhaust)
Valve Lift (inches) 0.509 (Intake)0.509 (Exhaust)
Lobe Separation Angle (degrees) 112 (Exhaust)
Opens (degrees) 3.5 BTDC (Intake) 48.5 BBDC (Exhaust)
Closes (degrees) 37.5 ABDC (Intake) -5.5 ATDC (Exhaust)
Comp cams 1.6 roller rockers
BBK 70mm TB and EGR plate
Granatelli MAF
24 or 30 pound injectors
Sound like a good setup? She's thinking of taking out a loan, and getting this plus a tremec 3550. Would 24 or 30# injectors be better?