• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

How do you fix the rattle in the dash/middle vents?

  • Thread starter Thread starter wanta5.0
  • Start date Start date Jul 31, 2005

wanta5.0

Founding Member
Jan 20, 2002
546
0
16
Jul 31, 2005
#1
  • Jul 31, 2005
  • #1
I know I read somewhere that there was a TSB on this because it happens to so many of these cars. Does anybody know how to fix it? It pisses me off.
 
R

rage707

Founding Member
Oct 26, 2000
318
0
0
Springfield MA / Winston-Salem NC
hometown.aol.com
Jul 31, 2005
#2
  • Jul 31, 2005
  • #2
Hey There,

I have the exact same car as you, and the exact same problem with the rattle. It pisses me off too, hopefully someone has an answer.
 
I

Ice782

New Member
Jun 24, 2003
34
0
0
Crofton, MD
Jul 31, 2005
#3
  • Jul 31, 2005
  • #3
Mine does that too....It seems to help when I put pressure on the vent with my hand. I was thinking about maybe lining the middle vent with like a velvet strip or something that would not be visible (If I could take it apart without f'ing it up). I'm not sure though.
 

ToplessStang

Member
Mar 7, 2004
591
0
17
Montreal, Canada
Jul 31, 2005
#4
  • Jul 31, 2005
  • #4
The TSB makes you replace the two center vents with new ones. If you guys need, I'll get you the part number. For those of you with warranty, it's covered.
 
I

Ice782

New Member
Jun 24, 2003
34
0
0
Crofton, MD
Jul 31, 2005
#5
  • Jul 31, 2005
  • #5
Nice...I would def. like that part #
 

csledd

Official Ovary Punching Member
Founding Member
Aug 18, 2001
1,115
1
0
41
Paducah, KY
www.cardomain.com
Jul 31, 2005
#6
  • Jul 31, 2005
  • #6
hey I have an 03 DSG GT also with the same problem lol

hook us up with that part number, I doubt the dealership here will cover it on my car lol
 

ToplessStang

Member
Mar 7, 2004
591
0
17
Montreal, Canada
Jul 31, 2005
#7
  • Jul 31, 2005
  • #7
TSB 04-5-3 part # (3R3Z-19893-AB) Vent Louvre Assembly .
You really shouldn't have to pay for them if your car is still warrantied.
 
H

Hornetsnest

New Member
Jul 9, 2005
150
0
0
47
San Diego, CA
Jul 31, 2005
#8
  • Jul 31, 2005
  • #8
I got an 04 GT and I get the same thing...only notice it with the stereo off...still irritating though.
 

Dave0803

Member
Mar 3, 2003
236
0
17
46
Leonardtown, MD
Jul 31, 2005
#9
  • Jul 31, 2005
  • #9
Mine had the same problem. I just removed the vertical fins inside the vents and put them back in with out them. noise is gone.
 

wanta5.0

Founding Member
Jan 20, 2002
546
0
16
Jul 31, 2005
#10
  • Jul 31, 2005
  • #10
csledd said:
hey I have an 03 DSG GT also with the same problem lol

hook us up with that part number, I doubt the dealership here will cover it on my car lol
Click to expand...

I don't want to take mine in for little **** like this because I don't want them to void my powertrain warranty because of my h-pipe, tune, and shifter. Also I don't want to remove all of the **** just for a few rattles and seals and have to put it all back on.
 

RedBullitt

New Member
Jul 7, 2004
462
0
0
43
Morgantown WV
Jul 31, 2005
#11
  • Jul 31, 2005
  • #11
kick it lol

seriously though, i had a problem with that for a while, i just pulled the vent cover part and fiddled with it a while, and put it back together. the problem went away
 
F

FalconGuy016

New Member
Oct 26, 2004
437
1
0
Northern VA
Jul 31, 2005
#12
  • Jul 31, 2005
  • #12
"The vent rattle is fixed by simply replacing the barrel vent with an improved part. The part # for the replacement vent is 3R3Z-19893-AB. The old vent is pryed out of the opening using a small screw driver on the outside edge and the new vent is just snapped into place. The rattle is caused by "detachment of the air vanes from the pilot holes in the vent housing". I'm not sure what that means, but perhaps could be repaired instead of replaced."
 
S

superbuick

New Member
Oct 26, 2004
27
0
0
Aug 1, 2005
#13
  • Aug 1, 2005
  • #13
I also have the stupid rattle on my 04 GT. SOOOOOOOOOOO annoying - I took it in one week after buying it and according to them they "could not replicate" the noise. I hate taking the car in cuz they always get it dirty and don't take care of it the way I would like (I'm anal).

I'll try taking the vents out tonight....
 
S

spederman

Member
Apr 13, 2005
732
0
16
Aug 24, 2005
#14
  • Aug 24, 2005
  • #14
Man, this rattle is freaking me out also. I didnt have it until a couple of weeks ago after I installed my MGW shifter. Does anybody know, Does the trim piece around the a/c vents/controls/stereo just pull off? Do I have to take off the trim around my shifter first?

Has anyobody messed with it and made it go away without buying the new replacement part?
 
0

02mingreyconv

New Member
Sep 27, 2003
127
0
0
52
Bartlett, IL
Aug 24, 2005
#15
  • Aug 24, 2005
  • #15
FalconGuy016 said:
"The vent rattle is fixed by simply replacing the barrel vent with an improved part. The part # for the replacement vent is 3R3Z-19893-AB. The old vent is pryed out of the opening using a small screw driver on the outside edge and the new vent is just snapped into place. The rattle is caused by "detachment of the air vanes from the pilot holes in the vent housing". I'm not sure what that means, but perhaps could be repaired instead of replaced."
Click to expand...


This can be easily fixed with a piece of tape. And I bet you that the piece will cost less than 50 bucks so if you are worried about voiding your warranty, just go to a dealership and order the part and install it yourself. It should not take more than 1 minute to install.

Joe
 
S

Sanibeldan

New Member
Apr 8, 2018
1
0
1
89
Apr 8, 2018
#16
  • Apr 8, 2018
  • #16
There is a TSB on this problem. It is Article No. 04-5-3. The replacement vent part no. is 3R3Z-19893-AB. Rather than order the two vents from a Ford dealer, at $45.00 each, I found them on Amazon and paid $65.00 for a pair. Removing the old ones and installing the new ones is a snap. Took less than a minute. Use a flat head screwdriver and pop them out. After going through all this, here's the problem. I still have the f....ing rattle! Has anyone come up with a handyman fix --- like tape or a piece of fabric or something. I love this 01 Stang convertible. This is the only rattle in the car and I can't get rid of it. There is one solution: remove the vents and leave them out.
 

D Smith

Member
Feb 25, 2016
4
2
13
New Zealand
Apr 8, 2018
#17
  • Apr 8, 2018
  • #17
Hi regarding centre vent rattle , what i did was remove vents and disassemble them , carefully as very easy to break vanes, and put petrolium jelly in pin holes and reassemble, no more rattles , done this 3 years ago , but car is not used much , may be able to get it around pins without pulling them apart which would be better as vanes are very easy broken.
 
You must log in or register to reply here.

Similar threads

D
AC Circulation
  • Dtn520
  • Jun 26, 2026
  • The Welcome Wagon
Replies
1
Views
88
The Welcome Wagon Jun 27, 2026
LILCBRA
S
CHANGING BRAKE PADS
  • Scwhitten
  • Jun 8, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • 2
Replies
20
Views
417
1996 - 2004 SN95 Mustang -General/Talk- Jun 12, 2026
nickyb
S
01 GT DRIVERS SIDE DOOR LOCK CYLINDER LINKAGE
  • Scwhitten
  • May 13, 2026
  • SN95 4.6L Mustang Tech
Replies
3
Views
171
SN95 4.6L Mustang Tech Jun 19, 2026
melo.timo
M
S
FUEL PUMP ALWAYS ON
  • Scwhitten
  • Jun 6, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • 2
Replies
27
Views
504
1996 - 2004 SN95 Mustang -General/Talk- Jul 4, 2026
manicmechanic007
1990 Mustang with no-start condition - Fixed and how-to
  • TTSaleen
  • Mar 22, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
0
Views
135
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 22, 2026
TTSaleen
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?