I'm planning on a 5.0 / T-5 swap in my '65 coupe fairly soon. The motor could use a rebuild but has given me almost a year of 100% reliable service since I bought the car. It smokes some and does have some blowby. Here is a detailed list of what would be included in the package:
1966 289 heads (not sure of specs)
1965 4100 carb (C5ZF stamped on base)
block #C5AE-6015E
gold valve covers and air cleaner assembly (can use a cleaning / repaint)
stock exhaust manifolds
distributer, cap, wires (I may even throw in the spark plugs)
A/C compressor in good working condition (blows very cold)
P/S pump
water pump
alternator (replaced two months ago w/lifetime warranty)
starter
all accessory brackets
3 speed manual transmission
bellhousing
all other clutch components including clutch linkage but not the pedals (clutch disc, pressure plate, and T/O bearing will need to be replaced)
stock fan
3 row radiator
I will be keeping the wiring harness, accelerator linkage, shifter, coil, A/C hoses, and P/S hoses. Other than that I can't think of anything else I want.
If there is any further research anybody can point me to do on these parts to determine their exact value, please let me know.
I'm a reasonable person and wouldn't be looking for a ton of money, but I do know that some of these parts are worth a few bucks (carb, p/s pump, bracketry, etc). I'd just be looking to get a fair price to help offset the cost of my current build.
Any input is greatly appreciated.
1966 289 heads (not sure of specs)
1965 4100 carb (C5ZF stamped on base)
block #C5AE-6015E
gold valve covers and air cleaner assembly (can use a cleaning / repaint)
stock exhaust manifolds
distributer, cap, wires (I may even throw in the spark plugs)
A/C compressor in good working condition (blows very cold)
P/S pump
water pump
alternator (replaced two months ago w/lifetime warranty)
starter
all accessory brackets
3 speed manual transmission
bellhousing
all other clutch components including clutch linkage but not the pedals (clutch disc, pressure plate, and T/O bearing will need to be replaced)
stock fan
3 row radiator
I will be keeping the wiring harness, accelerator linkage, shifter, coil, A/C hoses, and P/S hoses. Other than that I can't think of anything else I want.
If there is any further research anybody can point me to do on these parts to determine their exact value, please let me know.
I'm a reasonable person and wouldn't be looking for a ton of money, but I do know that some of these parts are worth a few bucks (carb, p/s pump, bracketry, etc). I'd just be looking to get a fair price to help offset the cost of my current build.
Any input is greatly appreciated.