i just put uppers and lowers on. i seem to have quite a bit of rattling and clunking going on with my upper control arms. the lowers i bought new, they are upr adjustable with the heim joint in the front and a poly in the back. the uppers i bought used(low milage) from a freind and are jds double adjustable with the heim joint in the front and polys in the back.
the car didn't seem to make much noise until today. i just got done readjusting my pinion angle from -1* to -3*. now all of the sudden it seems to rattle and clunk pretty good. at low speeds, if you get on and off the gas you can really feel some movement. so, i jacked the car up and put jackstands under the rear axle tube. then i rocked the body back and forth and there seems to be very little play within the heim joints(uppers). but i can definatly feel a little. i put all new control arm bolts on and they are tight. no movement there. i'm just wondering what the normal amount of sound is with heim joints. any help is greatly appreciated.
the car didn't seem to make much noise until today. i just got done readjusting my pinion angle from -1* to -3*. now all of the sudden it seems to rattle and clunk pretty good. at low speeds, if you get on and off the gas you can really feel some movement. so, i jacked the car up and put jackstands under the rear axle tube. then i rocked the body back and forth and there seems to be very little play within the heim joints(uppers). but i can definatly feel a little. i put all new control arm bolts on and they are tight. no movement there. i'm just wondering what the normal amount of sound is with heim joints. any help is greatly appreciated.