How Much Would You Pay..

tamadrummer88 · May 4, 2014

Curious.

For a set of GT40 iron heads with 1.7 roller rockers, and explorer upper and lower.

tannerc91gt · May 4, 2014

What valve springs?
$250- maybe $300 or so with good springs

bentley429isBAC · May 4, 2014

For everything $450-500. Assuming the valve train is good.

Gearbanger 101 · May 4, 2014

About $650US assuming the heads have been recently reconditioned, with a fresh valve job and better springs. About $250 less if not.

EDIT....sorry, I missed the 1.7 RR earlier. Price adjusted.

tamadrummer88 · May 4, 2014

Very interesting. I offered the dude 300, and if he didn't accept, i was gonna offer 400. He said he had 1k in the setup. I can't imagine how much he'd want, but theres no way in hell id pay 1k for GT40 iron heads. Id just get a used set of aluminum heads or some Edelbrock E-street heads.

Gearbanger 101 · May 4, 2014

Ahhhh, I love it when people get taken and then attempt to recoup their losses by trying to get their money back out if the next guy.

Pass on them, hit up http://www.car-part.com and find your own set, delivered to your door for about 1/3 of what this clown is asking. Even if you paid for a new valve job, springs and seals you'll still likely not have much more than about half his asking sunk into the heads and intake.

tamadrummer88 · May 4, 2014

Gearbanger 101 said:
Ahhhh, I love it when people get taken and then attempt to recoup their losses by trying to get their money back out if the next guy.

Pass on them, hit up http://www.car-part.com and find your own set, delivered to your door for about 1/3 of what this clown is asking. Even if you paid for a new valve job, springs and seals you'll still likely not have much more than about half his asking sunk into the heads and intake.

Hawaii, the land where everything you buy is 100% more expensive than the mainland...

Funny, i saw a dude a month back with a set of GT40 heads and explorer intake locally for 450.

89oem · May 4, 2014

then be patient, around here decent rebuilt are around 500 from what i recently saw...

Mustang5L5 · May 5, 2014

Intake $75-100
Heads $150-300 depending on condition/springs/valves/etc.
1.7 RR's. $100-200 depending on brand, condition, etc

Grabbin' Asphalt · May 5, 2014

Location could drive it up, but it wouldn't be that d@mn high. I got $500-$600 in my gt40p and they are milled stage 3 ported etc.

Mstng93SSP · May 7, 2014

We don't get anything delivered to our door here in Hawaii without a HUGE shipping cost! I bet shipping on a pair of heads is at least $250 or more. I will look around for you. I have an explorer lower, but might end up using it. If I find something I will give you a shout.

Chris

dnbonds · May 7, 2014

You'll save 15% or more by switching to the mainland

madspeed · May 7, 2014

Gearbanger 101 said:
hit up http://www.car-part.com

I use that site as well!

tamadrummer88 · May 11, 2014

Mstng93SSP said:
We don't get anything delivered to our door here in Hawaii without a HUGE shipping cost! I bet shipping on a pair of heads is at least $250 or more. I will look around for you. I have an explorer lower, but might end up using it. If I find something I will give you a shout.

Chris

This is what happens when threads get buried from new ones popping up.

Thanks man. I have a lead on a cobra upper from a guy in Ft. Shafter but no lower.

How Much Would You Pay..

tamadrummer88

Active Member

tannerc91gt

This last 25% is foreign territory at this point

bentley429isBAC

Gearbanger 101

Straight Outta Locash

tamadrummer88

Active Member

Gearbanger 101

Straight Outta Locash

tamadrummer88

Active Member

89oem

Mustang Master

Mustang5L5

That is…until I whipped out my Bissell

Grabbin' Asphalt

Mstng93SSP

You have a nice rear end there Dave.

dnbonds

Active Member

madspeed

Colonel Mustard

tamadrummer88

Active Member

Similar threads

How Much Would You Pay..

Active Member

This last 25% is foreign territory at this point

Straight Outta Locash

Active Member

Straight Outta Locash

Active Member

Mustang Master

That is…until I whipped out my Bissell

You have a nice rear end there Dave.

Active Member

Colonel Mustard

Active Member

Similar threads

Privacy & Transparency

Privacy & Transparency