How the crap........

9

93 Stangvert

New Member

Nov 16, 2004

11

0

0

Nov 26, 2004

#1

• Nov 26, 2004

• #1

Do you route the belt for the Water pump to run in the right direction when you delete the air pump, Ac, P/S. This has been messing with me and my mind is hurting. Does anybody have a diagram or draw one and scan it for me. This is buggin the **** outta me , i bought the tensioner delete from Trickpro. And any way i do it the Water pump is rotating in the wrong direction. PLEASE HELP

Mike

 

_jb_

New Member

Mar 4, 2004

808

0

0

Michigan, Berrien County

Nov 26, 2004

#2

• Nov 26, 2004

• #2

Try this site,

http://www.fordmuscle.com/archives/2000/02/quicktips/index.shtml

The only way I think you can run a belt with such little accessories is to get an A/C Delete pulley.

 

5.0Droptop

...all those nights we shared, and you're a dude??

Special Agent Mukity-Muck Whats in Charge Round Here

May 15, 2002

1,785

1,130

233

Indiana

Nov 26, 2004

#3

• Nov 26, 2004

• #3

if the pump is turning backwards its correct.

 

B

baglock1

The Bartender

Founding Member

Aug 25, 2001

6,612

1

78

Space Coast, FL

Nov 26, 2004

#4

• Nov 26, 2004

• #4

You near Melbourne Mike?

If so, why didn't you ask TJ how to route it?

 

axeman

Founding Member

Feb 9, 2001

1,348

0

36

Elizabethtown, PA

Nov 26, 2004

#5

• Nov 26, 2004

• #5

reverse the tensioner. take it apart, take the spring out, drill a new hole on the other side of the housing and fit the spring back in there. now instead of the tensioner pushing down on the belt, it will now push up. the spring actually works in the opposite direction it was designed to, but it's worked for me for a couple years now(along with others). it might take a couple tries to get the hole in the correct place. if need be, i could go look at where i have mine drilled.