How To: Change Your Cluster to Blue L.E.D.s/Incandescent bulbs for $8

Justincredible · Mar 27, 2008

jprovence said:
I got my LED's from radio shack. I used around a 580ohm resistor, And I used incandencent in the HVAC. The blue part doesn't light up becasue the red light won't pass though it. Other then that, its a very even lighting thoughout the face. All you have to do it throw in some red incandecant bulbs in your hvac and solder some red LEDs and your done. I left the center film inside the HVAC. I think I may go back in and take it out though to see if I Can get the blue stripe to lite up even a little bit.

Thats what I did with my HVAC and the red side looks purple at night so it will probably have a similar effect on the blue side with red bulbs. I to get the clear piece off I had to drill out the black plastic that held it on but a little amazing goop or similar plastic glue will stick it right back on. Post some pics when your done.

I think the problem with my switches is the resistors are not high enough and thats why they are so bright. I will try some 580 ohms and see if it dulls it down a little because its way too bright and bothers me while Im driving.

jprovence · Mar 27, 2008

I actually just pryed the clear plastic peice off gently. It went right back on and doens move. Nothing looks purple on my HVAC. I got my bulbs from the parts store. I think I got too big of bulbs though. The HVAC feels warms to the touch.

Cmpfreak88 · Apr 1, 2008

Alright, so I soldered on a new red LED for the defroster switch and am in the process of ordering a white LED for the wording, but before I place the order I want to buy some LED's to put under the dash to light up the driver and passenger foot wells. I don't really want to buy tubes or strips if I don't have to since I know these LED's light up really bright and don't want it too bright underneath anyways. Right now I'm looking at just buying some of the Super Wide Super Stars from Autolumination to mount under the dash for the driver and passenger front and then under the seats for the rears. I was only planning on using one for each and figured that would be bright enough but was wondering what you guys thought!

jprovence · Apr 1, 2008

I would use a strip of lower powered LEDs. Even wide angle LEDs have poor light distrobution. Since the light isn't going very far, you won't need too many.

RBR BRNR · Apr 8, 2008

i read the whole post, and all i can say, is thanks to everyone for their efforts!! really informative.

i just have a question, for thos guys that changed the defroster, traction etc bulbs. are these the bulbs you guys used? http://cgi.ebay.com/100x-Red-3mm-LE...ryZ26207QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

jprovence · Apr 8, 2008

those would work, but will proably going to be way too bright at 5000mcd

RBR BRNR · Apr 8, 2008

jprovence said:
those would work, but will proably going to be way too bright at 5000mcd

what would you recommend?

3000mcd? http://cgi.ebay.com/10-sets-3mm-Red...VQQcmdZViewItemQQ_trksidZp1638Q2em118Q2el1247

jprovence · Apr 9, 2008

The ones that lite up like stock around around 5.0 You dont need a ton of light,

http://www.radioshack.com/product/i...roductId=2062552&support=support&tab=features

there is the exact LED I used. Keep in mind, it needs a resistor soldered in .

RBR BRNR · Apr 9, 2008

jprovence said:
The ones that lite up like stock around around 5.0 You dont need a ton of light,

http://www.radioshack.com/product/i...roductId=2062552&support=support&tab=features

there is the exact LED I used. Keep in mind, it needs a resistor soldered in .

thanks! btw where did you get your resistors from? and what size are they? 580 ohms right? coulndn't find them on the radioshack website :/

5.4ever · Jun 28, 2008

Just joined this site. Wanted to ask if anyone has tried this on a 99. How was the light passing through? Thanks

BennyBlown2v · Jun 28, 2008

5.4ever said:
Just joined this site. Wanted to ask if anyone has tried this on a 99. How was the light passing through? Thanks

Dude go through this thread..pretty much all of the pictures are from 99-04 stangs (they are the SAME thing in this regard).

5.4ever · Jun 28, 2008

BennyBlown2v said:
Dude go through this thread..pretty much all of the pictures are from 99-04 stangs (they are the SAME thing in this regard).

Dude, I went trhough the whole thread. No one states if they did this to a 99. I know this is for the New Edge Mustangs but some are working and some are not. Just wanted to know if any 99s did with with success. Thanks

Mustang5L5 · Jun 28, 2008

Now....has anyone changed the color of the Mach 460 illumination??

I know the Lincoln Aviator uses the 6-disk head unit, but with blue illumination for the buttons and LCD screen. Has anyone tried to retrofit it??

AmBo · Jul 3, 2008

Mustang5L5 said:
Now....has anyone changed the color of the Mach 460 illumination??

I know the Lincoln Aviator uses the 6-disk head unit, but with blue illumination for the buttons and LCD screen. Has anyone tried to retrofit it??

I've seen this discussed often but never seen success pictures.

Benny, I agree, when I see people post in this thread like "will this work on...blah blah" I just ignore it. I think every year from 99-04 has been done one. Some work, some don't. Don't know the pattern but for like $15 and 10 minutes of your time, do it and see if it works

laser2kgt · Jul 5, 2008

Glad to see your still around ambo. Need your help or anyone else's. I notice how some people put the blue on their HVAC but the blue overpowers the red bar on the temp control, kinda like this:

Notice how this guy made his whole HVAC blue but still kept the red temp control red.

Does anyone know how to keep the red part red, but still have the HVAC blue?
Thanks!

02nightmaregt · Jul 5, 2008

Thats a cool pic. I think thats the first time i've ever seen a S-AFC(or whatever that is) in anything but an import.

mustang50v8 · Jul 5, 2008

laser2kgt said:
Glad to see your still around ambo. Need your help or anyone else's. I notice how some people put the blue on their HVAC but the blue overpowers the red bar on the temp control, kinda like this:

Notice how this guy made his whole HVAC blue but still kept the red temp control red.

Does anyone know how to keep the red part red, but still have the HVAC blue?
Thanks!

that might be a 98 mustang. the 94-98 uses more of an aqua color backing and when a picture of it is taken it looks blueish.

laser2kgt · Jul 6, 2008

So you all done think its possible to leave the temp. control red as that guy did it but on my 03 stang?

mustang50v8 · Jul 6, 2008

laser2kgt said:
So you all done think its possible to leave the temp. control red as that guy did it but on my 03 stang?

what i said is that i dont think he did anything. i think it is stock.

the only way i can think of to leave it red and blue is to use white LED's

laser2kgt · Jul 6, 2008

Oh, that gives me an idea, maybe it'll work. What if i buy the HVAC tint from a 98 mustang to replace mine? I've seen people remove it and it looks something like this:

I'd assume the 98' tint is aqua. Also change the light to a blue light to make it more blue and less aqua. Anyone think that would work? Anyone know whats the specific name for the HVAC tint stuff or where i can get it?

How To: Change Your Cluster to Blue L.E.D.s/Incandescent bulbs for $8

New Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

New Member

Member

New Member

Member

That is…until I whipped out my Bissell

Active Member

New Member

To hell with your Mustang, I want to see your HOG!

Member

New Member

Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency