• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

howd i do?

  • Thread starter Thread starter 98laseredgt
  • Start date Start date Jul 21, 2004
9

98laseredgt

New Member
Jul 16, 2004
122
0
0
indianapolis
Jul 21, 2004
#1
  • Jul 21, 2004
  • #1
went to the track for the first time in the mustang last night and i think i did pretty good. the track here is known for being pretty slippery after the first 10 runs or so, so i made sure to get there 30 mins before they opened so i could be first in line. i ended up being second so i could race a guy i met a few days ago with a 94-95 5.0. all he had that i could see was a cai trickflow intake and exhaust. he also had a 50 shot i think but he wasnt using it. anyhow we lined up, it was my first time driving a 2wd car there for about a year. the run was dead even the whole way down the track. i was shifting at 5k on the advise of a former mustang owner i know. it worked very well, on my later runs i would run alot slower by winding it out to 5500 or higher. here is the numbers:

ME HIM
r/t .191 .150
60' 2.181 2.108
330 6.160 6.151
1/8 9.448 9.506
mph 75.09 73.41
1000 12.263 12.332
1/4 14.650 14.701
mph 94.55 95.92

so, howd i do? BTW my only mods are k&n drop in, jegs off road h-pipe and flowmaster catback.
 
B

billyfe390

New Member
Aug 18, 2003
573
0
0
Jul 21, 2004
#2
  • Jul 21, 2004
  • #2
Not to bad. The 60' needs to be lower but all in all not too bad.
 

twogts4us

15 Year Member
Apr 1, 2004
4,188
12
79
Dunedin, FL
Jul 22, 2004
#3
  • Jul 22, 2004
  • #3
Those are some pretty good #s for a non PI with just exhaust. Good work, nice consistency. Of course the 60' needs to be lower, but it will ALWAYS need to be lower - this is, most often, the key to a good run.
 

cmb91LX

New Member
Apr 20, 2004
432
0
0
Memphis
Jul 22, 2004
#4
  • Jul 22, 2004
  • #4
twogts4us said:
Those are some pretty good #s for a non PI with just exhaust. Good work, nice consistency. Of course the 60' needs to be lower, but it will ALWAYS need to be lower - this is, most often, the key to a good run.
Click to expand...



 
You must log in or register to reply here.

Similar threads

T
First Car, what should I do for power??
  • tunedV6
  • Apr 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
7
Views
434
1996 - 2004 SN95 Mustang -General/Talk- May 4, 2026
580HP*428Cj
5
Cobra Brake Conversion - Spare Wheel/Tire Search
  • AeroCoupe
  • Aug 2, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
458
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 2, 2026
AeroCoupe
M
Engine Unexplainable Exhaust Pop and Gurgle
  • Mrnissen122
  • Feb 14, 2026
  • Fox 5.0 Mustang Tech
Replies
12
Views
793
Fox 5.0 Mustang Tech Feb 18, 2026
Noobz347
0
V6 to V8 Swap info
  • 02_2v_Curtis
  • Jan 11, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
1K
1996 - 2004 SN95 Mustang -General/Talk- Oct 7, 2026
2v_johnny
2
S
Fuel ‘88 GT Runs Rich Cold — Fixes Itself When I Unplug Sensors (ECT, MAF, O2, etc.)
  • Sufarry
  • Nov 6, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
1K
Fox 5.0 Mustang Tech Nov 9, 2025
Mustang5L5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?