I have a 95 Gt Vert that has 65k miles on it. I am slowly upgrading items on it that need to be replaced anyways. I have already lowered it and put in steeda x2 ball joints and MM 4-post caster camber plates. IMy most recent upgrade was Blue Oval upper and lower control arms with polyurethane bushings and now I hear a howl from the rear end. The noise occurs at all speeds but increases in volume as speed increases. It still has the original gears.
Could this be a vibration that was always there but I could not hear because of the stock rubber bushings or did I change the angle of the rear end and something is not correct anymore? I measured the new control arms before I installed them and they seemed to be the same.
Could this be a vibration that was always there but I could not hear because of the stock rubber bushings or did I change the angle of the rear end and something is not correct anymore? I measured the new control arms before I installed them and they seemed to be the same.