Hows your winter dust collector looking?
- Thread starter bentley429isBAC
- Start date
- Dec 19, 2010
- 5,721
- 4,244
- 224
Here they are, I can still drive them though, no snow here! Please disregard my messy work bench, I always clean it, but it never stays that way for long.
I'm sure of it, I hate him.
J/K
BlownRed5oh
Member
HotFox
15 Year Member
Kind of tight in a 2 car garage 24x32...been sitting with no engine, trans, seats and carpet out. Fuel tank is also missing, Sumping fuel tank. Rebuilt trans is sitting on work bench, just finished going thru trans this past weekend. AFR came thru on giving me a good deal on replacement heads, they are 205's hope to get on the flow bench this weekend to compare these and the Dart's. Car has not moved since mid December, prior to car was at Team Z for in floor subs and reinforced torque boxes as well as their latest upper and lower control arms. Still kicking around if I want to yank the rear end and clean and paint under the car.
Scott
Finally finished building this after working on and off for 15 years
Also riding this around
Scott
Finally finished building this after working on and off for 15 years
Also riding this around
fivespeedsteed
20+ Year Stangneter 
dont even have a pic of mine under its cover. its 220 miles away at home. come on good weather.
this is currently what my ski looks like. it too is waiting for better weather. maybe this counts?
this is currently what my ski looks like. it too is waiting for better weather. maybe this counts?
MAC'n89Blckstng
Active Member
Here's mine, I've started her up a couple times. I'm waiting for my tax return to come so I can get new tires for the SC's for this year. I miss driving her alot!
Kind of looks like someone elses car?
Scott
Looks like the hatch version of myne... except his jalopy is fast
Here's where I'm at... I hate winter, on the plus side the UPS fairy will be visiting me this week!
Mintsick
10 Year Member
Cobra912
Active Member
I'd be really interested in seeing those flow numbers, be sure to post that up! What size bore will you be flowing them on?
Finally finished building this after working on and off for 15 years
Definitely had to do a double take on that one... Thought it was a real plane, haha. Nice picture.
Wow, i did too!!
I've had a T-6 Texan waiting for me to finish it...only been about 10 years
On the plus side, my R/C gas-powered 4WD car is ready and waiting for spring! Just got that going aftera few years of collecting dust!
I've had a T-6 Texan waiting for me to finish it...only been about 10 years
On the plus side, my R/C gas-powered 4WD car is ready and waiting for spring! Just got that going aftera few years of collecting dust!
Flavadave4
Active Member
Just hanging out waiting for some nice weather, it was -21* the other night, a 70 degree day would be welcomed. Chimney sweep set on the wing, ladder along the side and snowblower in front of it, no fast get away.
View attachment 195721
After reading Ozz's comment I figured I'd double check...yup, still there
View attachment 195722
View attachment 195721
After reading Ozz's comment I figured I'd double check...yup, still there
View attachment 195722
ID89GT
10 Year Member
I worked on mine a little bit today. Of course we also got a snow storm today haha. I think I might finally be figuring this carb thing out.. Got up to 10 inches of vac today instead of the 5 I been getting hahaha
HotFox
15 Year Member
Don’t remember exactly either a 4.030 or a 4.060. I will also try flowing the AFR's 205's with a 2.05" valve as I want to see if the 2.08" is shrouded on the 4" cylinder. I think the Darts are only a 2.02 so may do some valve swapping on that to. I know the bowl/valve job will not match the valve size but will give me an idea at higher lifts what the air likes.
Yes I have fooled a few with that picture of the plane. Would love to own a real one someday!
Scott
