Hows your winter dust collector looking?

GroverDill · Feb 22, 2011

No winter here to speak of

Over at my good friends place.

Boosted92LX · Feb 22, 2011

LarsD said:
Here they are, I can still drive them though, no snow here! Please disregard my messy work bench, I always clean it, but it never stays that way for long.

I'm sure of it, I hate him.

J/K

BlownRed5oh · Feb 22, 2011

here's a couple of my dust collector!

HotFox · Feb 22, 2011

Kind of tight in a 2 car garage 24x32...been sitting with no engine, trans, seats and carpet out. Fuel tank is also missing, Sumping fuel tank. Rebuilt trans is sitting on work bench, just finished going thru trans this past weekend. AFR came thru on giving me a good deal on replacement heads, they are 205's hope to get on the flow bench this weekend to compare these and the Dart's. Car has not moved since mid December, prior to car was at Team Z for in floor subs and reinforced torque boxes as well as their latest upper and lower control arms. Still kicking around if I want to yank the rear end and clean and paint under the car.

Scott

Finally finished building this after working on and off for 15 years

Also riding this around

fivespeedsteed · Feb 22, 2011

dont even have a pic of mine under its cover. its 220 miles away at home. come on good weather.

this is currently what my ski looks like. it too is waiting for better weather. maybe this counts?

aar0s · Feb 22, 2011

I got mine out and washed it this weekend, just in time to put it back in the garage.

MAC'n89Blckstng · Feb 23, 2011

Here's mine, I've started her up a couple times. I'm waiting for my tax return to come so I can get new tires for the SC's for this year. I miss driving her alot!

90lxcoupe · Feb 23, 2011

HotFox said:
Kind of looks like someone elses car?

Scott

Looks like the hatch version of myne... except his jalopy is fast

Here's where I'm at... I hate winter, on the plus side the UPS fairy will be visiting me this week!

Mintsick · Feb 23, 2011

What it looked like in November:

What it looked like mid-January:

habiv · Feb 23, 2011

Oh it's dusty! This was a couple of months ago...should be ready very soon!

Cobra912 · Feb 23, 2011

90lxcoupe said:
Looks like the hatch version of myne... except his jalopy is fast

Here's where I'm at... I hate winter, on the plus side the UPS fairy will be visiting me this week!

DO TELL.................what's the brown fairy bringing?

bentley429isBAC · Feb 23, 2011

90lxcoupe said:
Looks like the hatch version of myne... except his jalopy is fast

Here's where I'm at... I hate winter, on the plus side the UPS fairy will be visiting me this week!

OOooooooooooooooo neeewww tooyyyssssss.

NIKwoaC · Feb 23, 2011

HotFox said:
AFR came thru on giving me a good deal on replacement heads, they are 205's hope to get on the flow bench this weekend to compare these and the Dart's.

I'd be really interested in seeing those flow numbers, be sure to post that up! What size bore will you be flowing them on?

HotFox said:
Finally finished building this after working on and off for 15 years

Definitely had to do a double take on that one... Thought it was a real plane, haha. Nice picture.

Mustang5L5 · Feb 23, 2011

Wow, i did too!!

I've had a T-6 Texan waiting for me to finish it...only been about 10 years

On the plus side, my R/C gas-powered 4WD car is ready and waiting for spring! Just got that going aftera few years of collecting dust!

Flavadave4 · Feb 23, 2011

Just hanging out waiting for some nice weather, it was -21* the other night, a 70 degree day would be welcomed. Chimney sweep set on the wing, ladder along the side and snowblower in front of it, no fast get away.
View attachment 195721

After reading Ozz's comment I figured I'd double check...yup, still there
View attachment 195722

1bad67sbf · Feb 23, 2011

that looks like a hidden gem!!!!!

GroverDill · Feb 23, 2011

View attachment 195719

both.

1993SSP · Feb 23, 2011

I am glad to see I am not the only one knee deep in projects

ID89GT · Feb 23, 2011

I worked on mine a little bit today. Of course we also got a snow storm today haha. I think I might finally be figuring this carb thing out.. Got up to 10 inches of vac today instead of the 5 I been getting hahaha

HotFox · Feb 24, 2011

NikwoaC said:
I'd be really interested in seeing those flow numbers, be sure to post that up! What size bore will you be flowing them on?

Definitely had to do a double take on that one... Thought it was a real plane, haha. Nice picture.

Don’t remember exactly either a 4.030 or a 4.060. I will also try flowing the AFR's 205's with a 2.05" valve as I want to see if the 2.08" is shrouded on the 4" cylinder. I think the Darts are only a 2.02 so may do some valve swapping on that to. I know the bowl/valve job will not match the valve size but will give me an idea at higher lifts what the air likes.

Yes I have fooled a few with that picture of the plane. Would love to own a real one someday!

Scott

Hows your winter dust collector looking?

GroverDill

GoldMember

Boosted92LX

It's only an inch or two. What's the big deal?

BlownRed5oh

Member

HotFox

fivespeedsteed

aar0s

MAC'n89Blckstng

Active Member

90lxcoupe

Mintsick

habiv

Member

Cobra912

Active Member

bentley429isBAC

NIKwoaC

中國製造

Mustang5L5

That is…until I whipped out my Bissell

Flavadave4

Active Member

1bad67sbf

Active Member

GroverDill

GoldMember

1993SSP

ID89GT

HotFox

Similar threads

Hows your winter dust collector looking?

GoldMember

It's only an inch or two. What's the big deal?

Member

Active Member

Member

Active Member

中國製造

That is…until I whipped out my Bissell

Active Member

Active Member

GoldMember

Similar threads

Privacy & Transparency

Privacy & Transparency