Hypereutectic Pistons

[9350coupe]

Has Anyone Heard Of Alot Of Problems Wth These Cast Aluminum Pistons On The 1993 Model Year Mustangs Involving Supercharged Applications? What Do Ya Thinks Max Psi Of Boost Should Be?

Thanks

 

[HISSIN50]

Hypers should be alright - you will just REALLY want to dial in the tune.

good luck.

 

[Swarzkopf]

You have more of a margin of error with the earlier pre-93 forged slugs. This doesn't mean you can't make power on the hyperpathetics- like HISSIN said, it means you have to work harder to avoid going lean.

 

[Aliate X]

The rods will go out long before the pistons do.

 

[9350coupe]

Thanks Appreciate The Help

 

[Daggar]

It really doesn't mean that you have to work any harder. All it means is that you have to do it right (which should be the case no matter WHAT pistons you run). I love how folks talk about adding this or that and often never mention the tuning part of the process.

 

[GroverDill]

your doomed!

oh wait, youll be ok

 

[willys1]

Im in the same situation.Im dying to get a Ken Belle,but have a 93 LX with a stock motor(hypter... pistons) Daggar is really selling me on the idea!! But I put 40,000 miles a year on my car so Im concerned about detenation on those "hot July days" when Im stuck in traffic,or when Im do 85mph in the 100% humidity 8psi's on with a KB would be awsome,I'LL have the T-Moss/Thumper combo so I'd expect good things So when you guys say its all in the tune,you mean getting a chip burned that will richin it up??

 

[5spd GT]

If I can ever get this job I applied for...I'm going to get a Strim (8psi) on my 93...it isn't stopping me.

 

[Daggar]

I know we've talked about this quite a bit over the last couple of days Willy, and I'd like you to get information from other besides just me and TJM. My recommendation for your particular combination (as I understand it) would be the Anderson PMS. Anyone else think differently?

 

[willys1]

I know we've talked about this quite a bit over the last couple of days Willy, and I'd like you to get information from other besides just me and TJM. My recommendation for your particular combination (as I understand it) would be the Anderson PMS. Anyone else think differently?

Anderson PMS??? Actually Im starting school next week (full time with "no" job ) So Im cutting my daily mileage in half

 

[Daggar]

Anderson PMS??? Actually Im starting school next week (full time with "no" job ) So Im cutting my daily mileage in half

Check it out at:

http://www.andersonfordmotorsport.com

It's a gameboy for your car!

 

[88stangmangt]

Im in the same situation.Im dying to get a Ken Belle,but have a 93 LX with a stock motor(hypter... pistons) Daggar is really selling me on the idea!! But I put 40,000 miles a year on my car so Im concerned about detenation on those "hot July days" when Im stuck in traffic,or when Im do 85mph in the 100% humidity 8psi's on with a KB would be awsome,I'LL have the T-Moss/Thumper combo so I'd expect good things So when you guys say its all in the tune,you mean getting a chip burned that will richin it up??

if ur gonna spend all that money just take the extra day or so and rip the motor out and put in some new slugs and a re-build kit....

 

[GroverDill]

the pistons will be fine.

I make 430 at the wheels, on the stock pistons.

dont beleive the hype.

 

[NakedRaygun]

Don't detonate and you'll be fine...it's all in the tune..the block will split before they fail on a good tune.

 

[65stang311]

How much is the anderson PMS? I couldnt find a price anywhere on their website...

 

[willys1]

Check it out at:

http://www.andersonfordmotorsport.com

It's a gameboy for your car!

Daggar is that just too tune it,or does that bolt onto the car?

 

[9350coupe]

i saw it for about 899.00