• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

I can hear my valves.

  • Thread starter Thread starter Foxfan88
  • Start date Start date May 3, 2005

Foxfan88

My Grandpa has great wood.
Sep 13, 2004
2,487
4
0
Miami, Ok
May 3, 2005
#1
  • May 3, 2005
  • #1
I can hear my valves, my oil level is ok.

It just doesnt sound normal.
or it could be spark knock.

I had a problem before but it was a slower tick, and showed up more under a load, this shows up when you give it some gas. Much fast, like the rockers or valves or or something. could it be my octane level? i have been running 87
i had 93 and i think it was better.

ALSO!
my gas guage broke yesterday, how do i fix/ replace?
 

stang22

Active Member
Jan 29, 2003
1,318
7
38
Washington, D.C.
May 3, 2005
#2
  • May 3, 2005
  • #2
Could it be a header leak? I thought I had a bad lifter, but it was just a bad header gasket. Start it at night and open the hood and see if you see and sparks.

Tim
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
May 3, 2005
#3
  • May 3, 2005
  • #3
does it happen at idle (no load)? worse when the motor is cold? dont forget that it could be an exhaust leak.

good luck.
 

88_GT_5_oh

Sportin' a turbo 5.0 in Canadistan
Jul 4, 2004
1
0
1
WPG/MB/CA
May 3, 2005
#4
  • May 3, 2005
  • #4
start the motor cold and stick your hand around the hearder very very quickly to see if you can feel anything, it heats up REAL fast so do it quick. if you feel air blowing then its the gasket
 

Foxfan88

My Grandpa has great wood.
Sep 13, 2004
2,487
4
0
Miami, Ok
May 3, 2005
#5
  • May 3, 2005
  • #5
you cant hear it at idle, cant tell if its even there or way tooo quiet to hear.

Also, does the gasket seal up right against the head good or is there space. becasuse there is quite a bit of space on the front most left header pipe
 
J

ja1919

Member
Jul 26, 2004
91
0
7
May 4, 2005
#6
  • May 4, 2005
  • #6
mine makes a knocking sound when at idle..but when i rev it up..it stops or just gets quiet..any suggestions
 
You must log in or register to reply here.

Similar threads

D
Question about EGR valve, replacement, and a part on the valve.
  • DPP
  • May 9, 2026
  • SN95 V6 Mustang Tech
Replies
1
Views
120
SN95 V6 Mustang Tech May 23, 2026
DPP
D
Forced Induction Bypass valve backwards?
  • Dontknowchit
  • Jun 25, 2025
  • Fox 5.0 Mustang Tech
Replies
3
Views
338
Fox 5.0 Mustang Tech Jun 29, 2025
JD1964
S
Mach 1 iac valve in a 4.6 gt
  • solodriverz
  • Jun 3, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
77
SN95 4.6L Mustang Tech Jun 5, 2026
squeak93
Engine Gas in my oil
  • limp
  • Jun 15, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
35
Views
1K
Fox 5.0 Mustang Tech May 16, 2026
Mindseye007
Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
799
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?