spray it with wd 40 and let it sit over night,then put a propane torch just to one side of the metal where it connects and heat for about 4 minutes...then lock on some vice grips and yank that mf out...i can not be held liable if you end up torching your car,do it at your own risk,and remember to always use jack stands..being crushed to death screamming for help is an ugly way to go
spray it with wd 40 and let it sit over night,then put a propane torch just to one side of the metal where it connects and heat for about 4 minutes...then lock on some vice grips and yank that mf out...i can not be held liable if you end up torching your car,do it at your own risk,and remember to always use jack stands..being crushed to death screamming for help is an ugly way to go
I used a pair of vice grips, clamped them on, and worked and wiggled it while spraying with pb blaster every couple of minutes... worked after a little while of repetition...