• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

I got the bug again

  • Thread starter Thread starter Racerjoey1
  • Start date Start date Feb 25, 2008
R

Racerjoey1

Founding Member
Oct 21, 2002
76
0
7
Birmingham, AL
Feb 25, 2008
#1
  • Feb 25, 2008
  • #1
I had an 89 hatch a couple years ago, it was a pos. I should have done more research and looked more before I bought it.

EventuallyI want to build another. I never even got to run my 89 at the track. I build a GT40P headed 302 with an F cam backed with a crap T5. I didnt really know what I was getting into.

Anyway, my goal is to have another fox. I dont care if its a rolling car or what. I just want one that is in better shape than my last. I want a street/strip car, probably 50/50.

How hard would it be to get low 12's? I just want it to be street legal enough to enjoy on the weekends, but I want to be able to run 8.0's or so in the 1/8th.

Im thinking a 351/C4 might do it depending on what I build. Basically I would be on a pretty tight budget, but I am in no hurry so I could have time to save for what I need. I would like to bracket race it sometimes if that makes a difference.

I have a buddy that wants to build a 383 chevy c10 for the track, and I want to have him covered.


Sorry this is so long, but I have one more tech question. Say I had a 5.0L motor. What is needed to change from the factory hydraulic roller to a solid roller or even just a solid flat tappet cam?

Thanks for the help and suggestions,

Joey
 

mustangfan1990

New Member
Jul 17, 2005
505
1
0
Lenoir, North Carolina
Feb 25, 2008
#2
  • Feb 25, 2008
  • #2
I have a 302 with HCI and that IT and I run 8.03 and 12.6. It is now supercharged now though
 

BK_CAULEY

it's built for speed not longevity, woman
Dec 26, 2006
0
10
49
Thomasville, ga
Feb 25, 2008
#3
  • Feb 25, 2008
  • #3
Racerjoey1 said:
Sorry this is so long, but I have one more tech question. Say I had a 5.0L motor. What is needed to change from the factory hydraulic roller to a solid roller or even just a solid flat tappet cam?

Thanks for the help and suggestions,

Joey
Click to expand...

reomove intake> remove spyder hold down plate> remove dog bones and lifters> remove hydro cam then install solid lifters and cam. done.
 
R

Racerjoey1

Founding Member
Oct 21, 2002
76
0
7
Birmingham, AL
Feb 25, 2008
#4
  • Feb 25, 2008
  • #4
One more question, about how much rwhp is required to run those times? 300-ish depending on traction?

Thanks,
Joey
 
5

57fairlane

New Member
Apr 2, 2005
560
0
0
Oakwood, GA
Feb 26, 2008
#5
  • Feb 26, 2008
  • #5
8.0s?

with a c4 its around 260rwhp depending on the 60ft obviously. I have seen as low as 84mph go 8.0s . . .

I would get a late model 351 with a roller setup.

find a used set of aluminum heads for under a grand (twisted wedge, windsor jr lites, possibly AFR or RPMs.)
trick flow stage 2
RPM intake
650 holley

it would probably run in the 7s with little thought and would be pretty inexpensive. There are thousands of different ways to run high 7s/low 8s.
 

mazroth

Member
May 20, 2005
56
0
6
KY
Feb 26, 2008
#6
  • Feb 26, 2008
  • #6
You can run low 8s high 7s with a h/c/i 302. Also need supporting components like any other motor, other induction parts, suspension, and knowing how to drive the car, and know how the car responds to certain driving. A stroked 302 should out perform a 351, but a stroked 351 should be a blast.

Ive seen bolt on stangs with stock heads and intake with 150 shot running in the 7s.

Not sure about that chevy and how it would run. If your wanting to bracket race alot, and win, an auto is the way to go.

I would personally like to have a 460/c6 in my next fox to bracket race with.
 
R

Racerjoey1

Founding Member
Oct 21, 2002
76
0
7
Birmingham, AL
Feb 26, 2008
#7
  • Feb 26, 2008
  • #7
Yeah I definitely want a good built auto this time around. I hated how my T5 shifted, but that could have just been a bad apple.
 
You must log in or register to reply here.

Similar threads

M
  • Poll Poll
Stroking a Mexico 289 or newer roller 302
  • MaryJaneTheMustang
  • Aug 12, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
1
Views
162
1965 - 1973 Classic Mustangs -General/Talk- Aug 12, 2026
Bullitt347
D
Engine HO cam in non HO roller block ‘93 f150
  • DanC1993f150
  • Mar 21, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
522
Fox 5.0 Mustang Tech Mar 29, 2026
General karthief
J
Intake
  • James S
  • Jul 10, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
307
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 12, 2026
James S
J
9
Engine Donor '00 Mountaineer meet '91 Fox
  • 91firecracker
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
1K
Fox 5.0 Mustang Tech May 28, 2026
91firecracker
9
C
New mustang owner
  • CPH89LX
  • Apr 26, 2026
  • The Welcome Wagon
Replies
3
Views
224
The Welcome Wagon Apr 27, 2026
91AOD5.0LX
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?