I gotta job!!!What are these mods gonna do?

cyberwolf1986 · Dec 1, 2005

I already 3000 Pi converter,4.10's,Fipk,mac headers,american thunder cat,asp pulley's, and a rear seat delete. I ran this setup without the pulley and i got a 15.2 90 with a 2.21 60', but i didnt cool down the car at all. There was no spinning off the line. NOw that i gotta a job, I want these mods for the summer. Bassani X-pipe with cats- i got emmissions, Ford Racing 65mm TB- I dont have enough power get bigger Tb, C&L 76mm kit with the plastic sheild and everthing, 275-17-40 Nitto's 555r because imma need grip,I'm thininking TFS Street manifold but i dunt no yet, I also want to redo my headers and catback becuase i want bassani headers and magnaflow catback and i have like 4 bolts missing on my headers.What do you guys think is gonna happen with with the stuff and do u guys think the stuff i want is good or wat. I would opt for a pro-m cuz that wat alot of people say is good but they are more money and i dont see any info on them ever. thanks alot guys, Im hoping for low 14's after all this like 14.2 @ 96.

rustang94 · Dec 1, 2005

I think the exhaust and intake should give you more topend to bring up that mph. Then with good traction with 60ft in 1.9s 1.8s low 14s should be easy.

blk9450 · Dec 1, 2005

cyberwolf1986 said:
I already 3000 Pi converter,4.10's,Fipk,mac headers,american thunder cat,asp pulley's, and a rear seat delete. I ran this setup without the pulley and i got a 15.2 90 with a 2.21 60', but i didnt cool down the car at all. There was no spinning off the line. NOw that i gotta a job, I want these mods for the summer. Bassani X-pipe with cats- i got emmissions, Ford Racing 65mm TB- I dont have enough power get bigger Tb, C&L 76mm kit with the plastic sheild and everthing, 275-17-40 Nitto's 555r because imma need grip,I'm thininking TFS Street manifold but i dunt no yet, I also want to redo my headers and catback becuase i want bassani headers and magnaflow catback and i have like 4 bolts missing on my headers.What do you guys think is gonna happen with with the stuff and do u guys think the stuff i want is good or wat. I would opt for a pro-m cuz that wat alot of people say is good but they are more money and i dont see any info on them ever. thanks alot guys, Im hoping for low 14's after all this like 14.2 @ 96.

are you on drugs or do you normally incoherently ramble and make posts with no relevance to the title?

cyberwolf1986 · Dec 1, 2005

I asked what are these mods gonna do and i titled it i got a job now so i can pay for these mods so i said what are these mods gonna do. I did exactly wat the title is

cyberwolf1986 · Dec 1, 2005

i said exactly wat the title said, what are these mods gonna do as in make me run wat time

rustang94 · Dec 1, 2005

apparently he can't read.

CManT1914 · Dec 1, 2005

That maf will be absolutely USELESS at this point! I'd save the money and buy a used Cobra intake instead. My C&L maf kit was $300! My Cobra intake was $200! My C&L did NOTHING! My intake took me from a 14.8@95mph to a 14.1@99mph!

cyberwolf1986 · Dec 1, 2005

yea but i think the cobra intake is a hassle, they say you have to change to a fox setup tb and then elbow it and i would think that if i got a 94-95 one it would be good but they are expensive. i rather go wit a tfs street becuase i think it is a better intake then the cobra just incase i choose to grow later and its only 379 new the cheapest used cobra i have seen is 289

CManT1914 · Dec 1, 2005

Get a 94/95 Cobra intake (I got a 95 SVO) and you'll be golden. Check the classifieds, they are really cheap, and eBay too.

As far as power goes, the Cobra intake can go a long ways. When ported, it can support a lot of power. Mine is ported too, I forgot to mention that.

EDIT: As for the fox setup, you only have to use a fox TB if you don't use the elbow. The elbow is made for us 94/95 guys who want to keep the 94/95 throttle body setup. You do one or the other, not both.

cyberwolf1986 · Dec 1, 2005

ok ill check it out but man everytime i do i come up with a 450 or 500 dollar 94-95 intake thanks for the info though

cyberwolf1986 · Dec 2, 2005

any one else have any opinions on these subjects

94MustangGT5.0 · Dec 2, 2005

Definitely do the intake swap, choose whichever one you think best suites your long term goals with the car. With that throw on a TB and give you car a tune up. Plugs, wires, cap and rotor, pcv, clean mass air meter, etc. might need cleaning/replacing if you have not done it for quite a while. Also, get that choke off performance h-pipe off of your car and get a replacement like the bassani you mentioned for sure! I still think that your car should be trapping a higher MPH than it is, the stall, gears, and other mods should have shown more significant gains than they have.

Blackened302 · Dec 2, 2005

CManT1914 said:
That maf will be absolutely USELESS at this point! I'd save the money and buy a used Cobra intake instead. My C&L maf kit was $300! My Cobra intake was $200! My C&L did NOTHING! My intake took me from a 14.8@95mph to a 14.1@99mph!

blk9450 said:
are you on drugs or do you normally incoherently ramble and make posts with no relevance to the title?

94GTLaserRC · Dec 2, 2005

I was surprised to see only 15's with those mods....mainly the converter and gears... I remember Vib mentioning knocking off close to a full second in his older car with converter, shift kit, and gears.
RC

CManT1914 · Dec 2, 2005

Ram000 said:

Hey Paul, got anything useful to add, or you just gonna make fun of us who know some stuff?

ProKiller · Dec 2, 2005

intake, tb, and mas, h-pipe. not c&l, spend the money on the pro-m its worth it.

what is the long term goal of teh car? if you want nice street n/a power just go with a cobra. if you are going to put on a power adder, i would go with the TFS.

figure out where u want to go with the car and then ask us what we think. i don't think u gave enough info.

Methodical · Dec 2, 2005

CManT1914 said:
Hey Paul, got anything useful to add, or you just gonna make fun of us who know some stuff?

Good post. I love it. I was thinking the same thing.

I've notice that this guy only does the "owned" thing. Apparently he just visit post for sake of using a limited vocabulary - "owned". Doesn't feel good does it? If you have no value to add then zip it. What you do is useless. Peace

Black95GTS · Dec 2, 2005

ProKiller said:
intake, tb, and mas, h-pipe. not c&l, spend the money on the pro-m its worth it.

what is the long term goal of teh car? if you want nice street n/a power just go with a cobra. if you are going to put on a power adder, i would go with the TFS.

figure out where u want to go with the car and then ask us what we think. i don't think u gave enough info.

I wouldn't spend the money on an MAF unless you are going full HCI or a power adder. You're stock MAF is good until 270ish RWHP which you won't be very close to. And by the time you are making enough power for another MAF, you'll be making enough power for bigger injectors, so I would get the MAF and injectors together, calibrated correctly.

You should be trapping lower then that. I would do a complete tune up before I started any more mods. Especially O2s... why does everyone forget these? Any part heat cycled thousands of times over 10 years is gonna take a dump and is not working as good as it used to be, i'll put money on it. And at WOT when dragging its the most important sensor!

I like my street heat! Big time mid RPM improvement.

In terms of how the poster writes... no its not easy to read but blasting the guy for it solves nothing and contributes nothing to the post. Ask him to articulate better and we will be able to answer his questions better. Calling his question incoherent and rambling does nothing except excite animosity. It's even more useless then popping the owned flag on a tech thread.

Adam

Synned · Dec 2, 2005

Theres something wrong with your car. A Stock AODE basically gets those times ~ 89mph. With a converter and gears you should be low 14's already....
Does your car run well? Try cleaning the MAFs.

Blackened302 · Dec 2, 2005

Methodical said:
Good post. I love it. I was thinking the same thing.

I've notice that this guy only does the "owned" thing. Apparently he just visit post for sake of using a limited vocabulary - "owned". Doesn't feel good does it? If you have no value to add then zip it. What you do is useless. Peace

ahh come on, guys, give me a break. gotta have a comic relief! i DO NOT just go around posting the "owned" thing--it was appropriately placed!

seriously, though, i'm definately with Chris on saving the money on the throttle body for the intake. i didn't see heads on your list--might wanna seriously consider those, too, even if you just get gt40's. try and start from the inside out--i'm sure that'll help out a LOT when coupled with the stall you got.

I gotta job!!!What are these mods gonna do?

cyberwolf1986

New Member

rustang94

Member

blk9450

cyberwolf1986

New Member

cyberwolf1986

New Member

rustang94

Member

CManT1914

New Member

cyberwolf1986

New Member

CManT1914

New Member

cyberwolf1986

New Member

cyberwolf1986

New Member

94MustangGT5.0

New Member

Blackened302

Active Member

94GTLaserRC

Squint as you approach, lest you be blinded by my

CManT1914

New Member

ProKiller

Methodical

Black95GTS

Active Member

Synned

took tubgirl on a date and got banned

Blackened302

Active Member

Similar threads

I gotta job!!!What are these mods gonna do?

New Member

Member

New Member

New Member

Member

New Member

New Member

New Member

New Member

New Member

New Member

Active Member

Squint as you approach, lest you be blinded by my

New Member

Active Member

took tubgirl on a date and got banned

Active Member

Similar threads

Privacy & Transparency

Privacy & Transparency