i have a big problem here t-5 swap

[swaysidelife]

ok im new to the mustang thing. i have a 66 mustang and im putting a 289 in it with a t-5 transmission. but my 289 is a older 5 bolt and i dont know what i need or if it is even possible with a 5 bolt. whats even worse than that i already bought all the parts for the 6 bolt swap. please help

 

[2+2GT]

ok im new to the mustang thing. i have a 66 mustang and im putting a 289 in it with a t-5 transmission. but my 289 is a older 5 bolt and i dont know what i need or if it is even possible with a 5 bolt. whats even worse than that i already bought all the parts for the 6 bolt swap. please help

Nahh, just call Glazier Nolan and tell them you need the bellhousing adapter plate for the 5-bolt bell/T5 conversion. Everything else will fit.

 

[swaysidelife]

is there a link or a phone number? thanks alot

 

[2+2GT]

Mustang Parts, Shelby Parts, and Restoration Services

 

[woodsnake]

Mustangs Unlimited - The Premier Source for Mustang, Shelby and Cougar Parts and Accessories

Make sure you have the correct balance for your fly wheel and get them both balanced before installation.