I have a feeling I am going to develop a LOUD WHINE under my hood soon!!!!!

grey5.0beast · Sep 30, 2006

What it looked like at 11:48

What it looked like at 12:17... I know I'm good.

and off the car

It is in PERFECT shape, it was on the first row, only second car I had looked at! Donor car was a 73k mile tbird supercoupe! spins perfect with no grinding. Came off easy, no rust on the car. I did this by myself in about 30 min.s. Then I couldn't get some vacuum lines off and forgot my razor so a really cool mexican guy came over and helped me out, then I helped him pull a 9 inch rear end out of an old van. I was going to grab the 30# injectors, but they were all messed up. I am gonna go back sometime this week to look for more, this was the 2nd car out of 15. Anyway, I'll be keeping you guys updated on my build!!!

grey5.0beast · Sep 30, 2006

Oh I paid 43 bucks out the door!

Roland69 · Sep 30, 2006

that's a great deal....hope it works good for ya

grey5.0beast · Sep 30, 2006

well of to the shower, I am gonna take my GUNK stuff with me, I am covered in grease head to toe lol

RsStanG1987 · Sep 30, 2006

I dunno hoe a v6 supercharger is going to work on your car but oh well. I know some guy on here put one on his but i think with all the time and effort your pissing in the wind.

grey5.0beast · Sep 30, 2006

yeah check out his site, I've heard they produce 5-6 psi stock.

His seems to work well!
http://webpages.eng.wayne.edu/~al0769/306/

Roland69 · Sep 30, 2006

ebay that and buy one for your car

RsStanG1987 · Sep 30, 2006

Honestly after looking at that site and all the fabricating he did im going to tell you flat out you just punched yourself in the nuts for 47 dollars.

85_SS_302_Coupe · Sep 30, 2006

RsStanG1987 said:
Honestly after looking at that site and all the fabricating he did im going to tell you flat out you just punched yourself in the nuts for 47 dollars.

Hell i'd come to the house and kick anyone in the balls for $20

Jaswir · Sep 30, 2006

it can be done, just alot of work and time consuming

Aaron · Sep 30, 2006

Looks like a lot of fabrication work and a number of headaches along the way, but if you can do it, you did well for $45.00!

mob · Sep 30, 2006

Man just be like jim, ill give you 400 bucks to fabricate all the brakcets for me, and for 447 bucks you got a 5psi s/c. Not bad, as long as thats all that goes into making it work, not sure what else.

ryan218 · Sep 30, 2006

grey5.0beast said:
What it looked like at 11:48

What it looked like at 12:17... I know I'm good.

and off the car

It is in PERFECT shape, it was on the first row, only second car I had looked at! Donor car was a 73k mile tbird supercoupe! spins perfect with no grinding. Came off easy, no rust on the car. I did this by myself in about 30 min.s. Then I couldn't get some vacuum lines off and forgot my razor so a really cool mexican guy came over and helped me out, then I helped him pull a 9 inch rear end out of an old van. I was going to grab the 30# injectors, but they were all messed up. I am gonna go back sometime this week to look for more, this was the 2nd car out of 15. Anyway, I'll be keeping you guys updated on my build!!!

I HATE YOU

there are no good cars like that around here. if i find one i will yanking the WHOLE drivetrian out
oh by the way. did the car RUN that you took it off or was it wrecked?

i dont really hate you. i just wish i could find thata round here.

grey5.0beast · Sep 30, 2006

I will just make up my own, I have a welder, acetylene torch, adn all the resources I need to do it. I also have a buddy of my dad's wiling to help, he is a delta mechanic!

grey5.0beast · Sep 30, 2006

ryan218 said:
I HATE YOU

there are no good cars like that around here. if i find one i will yanking the WHOLE drivetrian out
oh by the way. did the car RUN that you took it off or was it wrecked?

i dont really hate you. i just wish i could find thata round here.

IDK if it ran, looked to be in good shape. Also saw an 85 coupe with good tan interior

Curse · Sep 30, 2006

Should have looked for a 94-95 SC, their blowers are a lot better. Good score either way.

Henceforward · Sep 30, 2006

This doesn't look easy...

grey5.0beast · Sep 30, 2006

I'm a beast...

I am gonna go back and see if I can get quite a few electric fans fo like a dollar, then some more s/c's and a few turboes and throw it all on ebay, might make a good business

RsStanG1987 · Sep 30, 2006

grey5.0beast said:
I will just make up my own, I have a welder, acetylene torch, adn all the resources I need to do it. I also have a buddy of my dad's wiling to help, he is a delta mechanic!

So hopefully your car is running next year when you get finished but i doubt it..

grey5.0beast · Sep 30, 2006

I plan on doing it all in one shot. I want to do it before Nov. 25 where a bunch of local guys are renting out a track, but I'll probably end up doing it over the winter break. I am gona compile all the parts and then put it all on at once, hopefully ove like a 3 day weekend.

I have a feeling I am going to develop a LOUD WHINE under my hood soon!!!!!

Cookies should never be DUNKED!!!

Attachments

Cookies should never be DUNKED!!!

Sergeant Tangnet

Cookies should never be DUNKED!!!

I shaved all my pubes playing this game.

Cookies should never be DUNKED!!!

Sergeant Tangnet

I shaved all my pubes playing this game.

it sucks (I know) to be on the receiving end

Member

the guy who hits on his mom

In just 10 years, I'll be old enough to drive!!!!

Attachments

Cookies should never be DUNKED!!!

Cookies should never be DUNKED!!!

Member

The Avatar Master

Cookies should never be DUNKED!!!

I shaved all my pubes playing this game.

Cookies should never be DUNKED!!!

Similar threads

Privacy & Transparency

Privacy & Transparency