I have a working ash-tray lid ______ALRIIIIIIGHT

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
1
58
Port Elgin, Ontario
fixed it while I had the console out. I had another spring in my toolbox but it would work once and then "Bung Up" so I made a new hole in a better spot. I heated up the smallest allan key I could find and poked a hole in the console tab part thingy about 1/2-3/4 of an inch from where the other hole was..... Works way better than the stock location.
 
  • Sponsors (?)