I just discovered i dont have a pcv valve, what to do?

[blink327]

Many of you guys have been a huge help helping me through my problems with the car. Im brand new to fords and have run into some problems. The main problem of lack of power has been fixed due to adjusting the timing. But i still have my intake spacer soaking through with oil. I know this is a sure sign of a faulty pcv, but i went out today and i dont have one. I found one of the vac lines with a screw in it. So what i can do to relieve pressure thats causing this spacer to soak with oil? I drove the car for about 10k with no problems till now. Any ideas once again guys

 

[GTJake]

Did you install the oil baffle on the underside of your Trick Flow lower intake?

Jake

 

[1105]

You can either...
A: go to a parts store, get a PCV valve and rubber hose and put it on
or
B: Leave it off and stick a breather on your valve cover

 

[95GTeee]

You can either...
A: go to a parts store, get a PCV valve and rubber hose and put it on
or
B: Leave it off and stick a breather on your valve cover

 

[wytstang]

You didn't buy one and put in why?

 

[1105]

I was being serious... I'd just go get a breather for the valve cover and stick that on and keep the PCV valve off.. Thats just me though.