• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

I know I'm not supposed to reuse a gasket but......

  • Thread starter Thread starter dec322
  • Start date Start date May 1, 2006
D

dec322

Member
Feb 11, 2006
401
2
16
Bham AL
May 1, 2006
#1
  • May 1, 2006
  • #1
.....I took off the upper intake and didn't have a gasket on hand. I was replacing the fuel injectors and going through the haynes manual and it never mentioned needing one. I knew I was screwed when I pulled the top off and saw I did need one (why didn't I think about this????: ). Anyways I just reused it......this was about 1 1/2 months ago.

What might happen? Will my car now explode?

Thanks.
 
M

madmaxin22

New Member
Nov 9, 2005
22
0
0
May 1, 2006
#2
  • May 1, 2006
  • #2
I have reused my upper several times... as long as its straight and not messed up at all you should be fine.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
May 1, 2006
#3
  • May 1, 2006
  • #3
I hav reused the upper manfiold gasket when it was in good shape. The clue is that the gasket does not stick to the mating surfaces. If you can lift it off and it didn't stick, you can reuse it.
 

crazypete

All my crevices are greased.
Oct 22, 2004
930
4
18
Arlington, MA
May 1, 2006
#4
  • May 1, 2006
  • #4
If you are worried about the seal between the upper intake and the heads, you can run a thin bead of RTV along the head/intake mating surfaces down around the intake/block surface and then you will know for a fact that the intake is sealed to the motor.

But if it has been 1 1/2 months and you have no operational concerns (high idle, coolant in oil) then you have escaped unscathed.

BTW, I reuse gaskets all the time. As long as they are intact and still a little flexible, I reuse them.
 

04sleeper

Founding Member
Jun 22, 2002
2,674
14
89
Dallas, TX
May 1, 2006
#5
  • May 1, 2006
  • #5
madmaxin22 said:
I have reused my upper several times... as long as its straight and not messed up at all you should be fine.
Click to expand...
 

Vinnietbird

Member
Jun 2, 2005
584
3
19
May 1, 2006
#6
  • May 1, 2006
  • #6
Yep,what they said.I've had my upper off about 6 times in the past 2 weeks doing different mods to the car.Still using the same gasket,no problems.
 
D

dec322

Member
Feb 11, 2006
401
2
16
Bham AL
May 2, 2006
#7
  • May 2, 2006
  • #7
Thanks everyone. I feel better now.
 
You must log in or register to reply here.

Similar threads

B
water pump installation questions
  • B0udreaux
  • Feb 5, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
38
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 28, 2026
General karthief
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
934
1965 - 1973 Classic Mustangs -General/Talk- Jun 20, 2026
gray owl
G
Resolved Fixing a GT40P Valvetrain nightmare
  • foxbodyclark
  • May 21, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
1K
Fox 5.0 Mustang Tech May 24, 2025
limp
L
Engine Need help diagnosing 2 dead cylinders
  • lvgnmz
  • Feb 13, 2025
  • Fox 5.0 Mustang Tech
Replies
3
Views
464
Fox 5.0 Mustang Tech Feb 13, 2025
Mustang5L5
M
Engine Unexplainable Exhaust Pop and Gurgle
  • Mrnissen122
  • Feb 14, 2026
  • Fox 5.0 Mustang Tech
Replies
12
Views
587
Fox 5.0 Mustang Tech Feb 18, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?