I put my motor back together and got it runing (like ****) and its smokin like crap and i drained the oil out of it which i know i didnt get all the milky oil out and put in new oil and filter just to flush it out and the oil in there now is milkyyyyy i dunno if its from mixing with the other oil that didnt drain out or what. its revvin high and takes a 5 or so seconds to idle back down? what would cause that? also what would cause it to smoke white smoke so bad? when i put the heads back on i took some oil and put a little around the cylidners were they were trying to rust from the water being in the cylinders. any help would be great! thanks!
well, it was runnin good for a few mins, i let it run the smoke pretty much stoped. then i said well im gonna put some water in it and just let it run and ugh yeah i did and right then it died and i cracked it up and its barley runnin missin like hell so, i guess the blocks cracked!!!
well, it was runnin good for a few mins, i let it run the smoke pretty much stoped. then i said well im gonna put some water in it and just let it run and ugh yeah i did and right then it died and i cracked it up and its barley runnin missin like hell so, i guess the blocks cracked!!!