I need the cam card for the E303 cam ASAP

[astronut1885]

Hey guys. I bought a lightly used E303 Ford Racing camshaft for my buildup, but it didn't some with the cam specs and card. My mechanic said he needs to know the information on the card, and he mentioned something about "if it's a dot to dot cam or not". I don't know what that means, but I do know that one of you has to have the info on the E303. Any help is greatly appreciated!

 

[ZarnAutomotive]

e-cam has 220/220 duration 498/498 lift, and has a dot to line up with

 

[astronut1885]

Is that all the info on the card? I don't know much about camshafts, but I guess he need everything on the card.

 

[astronut1885]

I found this on FRPP's home site. Is it what I need?

http://www.fordracingparts.com/parts/part_details.asp?PartKeyField=1329

 

[2000xp8]

This should be it. I think it's the 2040 crane cam, since crane makes the e-cam.

I cannot gurantee that this cam is it, but that's what i've read and been told. (just covering my asss).

http://www.cranecams.com/?show=brow...=302 C.I.&partNumber=444231&partType=camshaft

 

[5.0fox]

ok heres the specs straight from the card:
grind #m-6250-e303
max lift: intake 110*, exhaust 110*
lift @ cam .311 intake and exaust
lift @ valve .498 intake and exhaust (1.6 ratio rockers)
CAM TIMING AT .004 TAPPET LIFT:
intake open 28* btdc close 74*abdc advertised duration 282*
exaust open 68* bbdc close 34*atdc advertised duration 282*

CAM TIMING AT .050 TAPPET LIFT:
intake open 0*btdc close 40*abdc duration 220*
exhaust open 40* bbdc close 0* atdc duration 220*



this is an exact copy of my ford e-303 cam card

 

[2000xp8]

I guess the crane 2040 is the e-cam, because it's an exact copy of the link i posted.

 

[88GTMustang]

so Basically if your choosing between the Crane Cam and The E Cam buy the E cam because its 165$ opposed to 179$ (well at least in summit) correct?if they are made by the same people then there prolly the same thing right?

 

[2000xp8]

so Basically if your choosing between the Crane Cam and The E Cam buy the E cam because its 165$ opposed to 179$ (well at least in summit) correct?if they are made by the same people then there prolly the same thing right?

I'd say so, you can also find e-cams on ebay pretty cheap.

 

[PURESTREET5006]

Cam goes in straight up and line up the dot's on the timing chain sproket..But make sure you have it installed on the compression stroke TDC on the #1 piston.