i think i need a bushings, what kind i dont know

[PeteyAce]

i hear a creak type noise coming out of my drivers side front wheel, also when i hit certain bumps it hits up against the splash wall(the splash wall is hang down about a bit but not close enough to rub up against it and never hit it b4. well i make a sharp right turn then i hear it especially if im going down hill. i need to know what kind of bushing it could be

 

[whtpny]

sounds like a bad strut to me. Maybe a ball joint?

 

[PeteyAce]

i thought of that but i thought nushings were alot more common, and how hard is that to change?

 

[whtpny]

Strut is easy with a little knowledge. Ball joint is not difficult either but most manuals say to replace the lower A arm. If you want more detail on changing them let me know.

 

[PeteyAce]

well i had my struts looked at and changed in dec. so i guess il start with a bushing(which kind) and ball joint?

 

[whtpny]

Look at this link. Pretty good on the replacement of ball joints. http://members.shaw.ca/Notchmustang/Balljoint.html link

 

[whtpny]

By the way go through and give everything a good shot of good grease.