• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

I Thought About It...

  • Thread starter Thread starter Strype
  • Start date Start date Jun 9, 2010
  • 1
  • 2
Next
1 of 2 Next Last

Strype

Cuthbert catcher
Founding Member
May 11, 1999
61
34
104
Huntsvegas, AL
Jun 9, 2010
#1
  • Jun 9, 2010
  • #1
SEE PIC

There is a beautiful droptop 89 GT sitting down the road from me. I pass it everyday on the way home. Once I even saw the top down while it was raining!

So yesterday I stopped to say hello to it. New red paint, new black top, BLACK LEATHER INTERIOR, 5 speed, 3:55's, roller rockers, 130k...

Me: OMGHiiiii2U

The salesman came out and said they wanted $6,900 for it...

Me: WTF?

So I said, "Well pop the hood." I saw painted blue factory heads, no smog pump, a huge weld job going from one side of a factory intake to the other, a Vortech sticker on the fan shroud, and everything had new gaskets...

Me:

In my mind this is what happened to this poor car. Some asshat put a vortech on it, put the dizzy on 180 degrees out, and blew the intake in half. Then he welded it back together. It's obvious that the heads have been off so that's not reassuring either.

Anywho, before he popped the hood I'd have given him 4k for it.
 

Attachments

  • redvert.webp
    31.5 KB · Views: 235

NIKwoaC

中國製造
15 Year Member
Oct 31, 2006
5,525
943
214
Chengdu Province
Jun 9, 2010
#2
  • Jun 9, 2010
  • #2
That is a really depressing story.

Which direction was the weld? Could the upper been cut in half, ported, and glued back together? Or am I giving the PO too much credit?
 

Strype

Cuthbert catcher
Founding Member
May 11, 1999
61
34
104
Huntsvegas, AL
Jun 9, 2010
#3
  • Jun 9, 2010
  • #3
It was only on top across every runner... Too much credit
 

tannerc91gt

This last 25% is foreign territory at this point
Founding Member
Nov 29, 1999
4,392
2,967
234
Indiana
Jun 9, 2010
#4
  • Jun 9, 2010
  • #4
I'd offer him half of that.
3k+ new 302 = nice car

for some reason dealerships seem to think these things are priceless when they sell them ad worthless when they take them on trade ins. And I really hate when the salesman thinks he knows what he's talking about
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,378
18,123
224
Massachusetts
Jun 9, 2010
#5
  • Jun 9, 2010
  • #5
Doesn't look like an 89 to Me. Small headrests and black gut say 1990+

Sure the intake wasn't cut open to port the runners? If the guy had a vortech on it, it would make more sense he would do that vs pay to weld it up vs buying a stock upper for 10
 

Onefine88

Previously 89SSC18
10 Year Member
Aug 3, 2006
1,422
796
154
Jun 10, 2010
#6
  • Jun 10, 2010
  • #6
I own and have restored two of these verts. Of course the dealer is going to price it high to start off. He'll come down off that if you make him a reasonable offer I'm sure. In reality that price is about right on that car in excellent condition. He'll probably end up getting around $5k or slightly higher after its all said and done.

The Fox cars are quickly rising in value now. The current economy is holding everything down temporarily.
I check the NADA guide regularly to see how my fox's are holding up. Lately I have been impressed.

I'd have to see the car in person and pick it apart myself. From the single pic it looks like a pretty nice fox vert. Still stock exterior, thats a "plus". Stock ride height. Pony rims, (weren't offered in '89). You say new top, thats a $1000 bucks right there. (Been there done that) twice. If the quality of the new paint and black leather is nice thats worth alot. 3.55's are much a huge performance increase from the stock 2.73's. Saved some money right there on that mandatory upgrade. LOL


I'd be willing to bet as well that the stock intake has been opened for porting ect. Never heard of blowing the intake on a Fox with a blower. It can be replaced used for less than $100 bucks. Who knows what happened to this engine in the past.
But I have learned over the years that the 5.0 is a solid engine. 130k is nothing. If it ain't smoking and knocking it will continue to perform. These are so cheap to replace, upgrade and/or repair these days.

In short (LOL), If you like it go back drive it and offer him $4K. Ya never know



Good Luck
 

Strype

Cuthbert catcher
Founding Member
May 11, 1999
61
34
104
Huntsvegas, AL
Jun 10, 2010
#7
  • Jun 10, 2010
  • #7
Thanks guys,
 

NIKwoaC

中國製造
15 Year Member
Oct 31, 2006
5,525
943
214
Chengdu Province
Jun 10, 2010
#8
  • Jun 10, 2010
  • #8
I have heard of blowing apart an intake, but it was a Cobra intake on a built engine. I'd have to find that article, but it was on top of a boost+juice engine. Nitrous backfire, I think. It's possible.
 

90lxcoupe

20+ Year Stangneter
Oct 7, 2003
3,596
350
134
Jun 10, 2010
#9
  • Jun 10, 2010
  • #9
NikwoaC said:
I have heard of blowing apart an intake, but it was a Cobra intake on a built engine. I'd have to find that article, but it was on top of a boost+juice engine. Nitrous backfire, I think. It's possible.
Click to expand...

I agree, but if it was a nitrous backfire it wouldnt be a straight weld across every runner, it would be picking up pieces of aluminum in the engine compartment for monrths after, I also dont think the level of boost on a stock 5.0 motor would ever blow an aluminum intake apart. Guys have put F1r's on stock motors and the intakes are still in one piece
 

NIKwoaC

中國製造
15 Year Member
Oct 31, 2006
5,525
943
214
Chengdu Province
Jun 10, 2010
#10
  • Jun 10, 2010
  • #10
90lxcoupe said:
I agree, but if it was a nitrous backfire it wouldnt be a straight weld across every runner, it would be picking up pieces of aluminum in the engine compartment for monrths after, I also dont think the level of boost on a stock 5.0 motor would ever blow an aluminum intake apart. Guys have put F1r's on stock motors and the intakes are still in one piece
Click to expand...

Oh I agree. Just speculating at this point.
 

Onefine88

Previously 89SSC18
10 Year Member
Aug 3, 2006
1,422
796
154
Jun 10, 2010
#11
  • Jun 10, 2010
  • #11
The later model plastic intakes will blow easily with nitrous. But the old 5.0 aluminum stockers?

Very hard to do.
 

Strype

Cuthbert catcher
Founding Member
May 11, 1999
61
34
104
Huntsvegas, AL
Jun 10, 2010
#12
  • Jun 10, 2010
  • #12
That weld is straight across the top... Hold on I draw

Artist's rendition of said intake... Not polished but you get the picture
 

Attachments

  • ArtistIntake.webp
    157 KB · Views: 171

stykthyn

I want to measure mine. It doesn't look that tall.
15 Year Member
Jul 6, 2006
5,232
2,652
223
gainesville
Jun 10, 2010
#13
  • Jun 10, 2010
  • #13
a weld like that would indicate ported runners in the upper.
 

NIKwoaC

中國製造
15 Year Member
Oct 31, 2006
5,525
943
214
Chengdu Province
Jun 10, 2010
#14
  • Jun 10, 2010
  • #14
stykthyn said:
a weld like that would indicate ported runners in the upper.
Click to expand...

+1
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,378
18,123
224
Massachusetts
Jun 10, 2010
#15
  • Jun 10, 2010
  • #15
I agree..that intake has been modified.

I think you could prob get that car for $4-4.5K. Cash talks with dealers
 

Strype

Cuthbert catcher
Founding Member
May 11, 1999
61
34
104
Huntsvegas, AL
Jun 10, 2010
#16
  • Jun 10, 2010
  • #16
I'm confused... How might one port through a half inch cut in the top of an intake? What does that little cut across the top do for you?
 

tannerc91gt

This last 25% is foreign territory at this point
Founding Member
Nov 29, 1999
4,392
2,967
234
Indiana
Jun 10, 2010
#17
  • Jun 10, 2010
  • #17
Usually that section of the intake is removed to gain access to the inside of the intake for porting. Did it look like it had been welded all the way around or just on top?
 

Strype

Cuthbert catcher
Founding Member
May 11, 1999
61
34
104
Huntsvegas, AL
Jun 10, 2010
#18
  • Jun 10, 2010
  • #18
Just on top, identical to the picture...

No way. The more I think about the less I want the headache. I'm building a fence around my backyard instead.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,378
18,123
224
Massachusetts
Jun 10, 2010
#19
  • Jun 10, 2010
  • #19
That's a weird place to put a random weld then. Kinda curious about it now
 

1991notchbackLX

Active Member
Dec 25, 2007
1,483
47
48
New York
Jun 11, 2010
#20
  • Jun 11, 2010
  • #20
I don't know about you guys, but I've never seen something blow up in a straight line. Even when things fail along a weak point, it's never that cleanly. The intake has probably been modified in some way, but I guess we'll never know since Strype isn't buying the thing.
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

G
Resolved Smoking Wiring Issue After GT40 Head Swap
  • Grapes
  • Aug 15, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
607
Fox 5.0 Mustang Tech Aug 22, 2026
Grapes
G
new :poo: box, may need to hit you guys up for 79-82 info when i fix thIs turd.
  • rednotch
  • Sep 27, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3
Replies
44
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 23, 2026
limp
M
How To Decode
  • Malcoll1
  • Mar 10, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
425
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 10, 2026
FoxChasis
F
5
Hello Everyone !
  • 5150K
  • Jul 3, 2026
  • The Welcome Wagon
Replies
0
Views
189
The Welcome Wagon Jul 3, 2026
5150K
5
What's it Worth? 2000 GT
  • Mustang5L5
  • May 8, 2026
  • What is it Worth?!?!?
Replies
6
Views
502
What is it Worth?!?!? Jun 13, 2026
KRUISR
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?